Routing
sauter Router Lifts for Router Tables
Router Lift for Router Motors
Pivoting router lift OFL3.0
Pivoting Router Lift OFL3.0K - Red Edition

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-01

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-02

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-03

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-04

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-05

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-06

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-07

Pivoting Router Lift OFL3.0K - Red Edition

Limited RED edition in KREG format | swivelling from -5° to 50° | for motors with Ø 43 clamping neck | height fine adjustment & magnetic reducing plates

Shipping within 24 hours (working days)

709,49 €

638,54 €

incl. VAT / excl. shipping costs

1

Brand:sauter
Article no.:SA-OFL3.0K-RED
Weight:6.96kg

You may also like

fraestisch-fraeslift-spezial-absaugung-kreg-format-sauter-sa-fml-br-k-01

Router Lift FML-BR - Kreg Format - Red Edition

Limited edition in RED | Unique and dust-free | With exact height fine adjustment & magn. reducing plates | for router motors with Ø 43mm clamping neck

Shipping within 24 hours (working days)

486,19 €

437,56 €

incl. VAT

Art.-Nr: SA-FML-BR-K-RED

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-01

2nd choice - Pivoting Router Lift OFL3.0K - Red Edition

Demonstration model | Fully functional | Limited RED edition in KREG format | swivelling from -5° to 50° | for motors with Ø 43 clamping neck | height fine adjustment & magnetic reducing plates

Not available at the moment

Art.-Nr: II-SA-OFL3.0K-RED

fraestisch-spezial-fraesanschlag-harvey-industries-har-800738-01

Harvey RF-36 Compass Router Table Fence

A router fence without equal | Play-free adjustment guarantees absolute precision

Shipping within 24 hours (working days)

950,81 €

incl. VAT

Art.-Nr: HAR-800738

3 Products

Technical Data

Dimension insert plate: 298 x 235 x 9 mm
Corner radius Insert plate: 19.05 mm (3/4")
Height adjustment per rotation: 4 mm
Max. Adjustment travel: 74 mm
Height router lift (max. extended): 240mm
Max. Router bit diameter: 55 mm
Weight: approx. 5 kg

oberfraesenlift-schwenkbar-kreg-format-rot-sauter-sa-ofl3.0k-red-02

Properties & Advantages

Quality from Germany
Solid construction of high quality aluminium and steel.
Fine height adjustment to 1/10mm
Extreamle precise fine height adjustment, with exact scaling an effective spindle lock, conveniently operated via Allen screw.
Smooth-running columns
Enable a stepless and exact fine height adjustment.
Compatible to common router motors
The OFL3.0 is compatible with a wide range of commercially available motors with 43 mm Euro-neck. All models can be found below.
The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the router cutter - especially for small workpieces,"snagging and getting stuck" on the edge of the hole eliminated!
Routing also without rip fence
2 drill holes for the fence pin allow you to free rout round workpieces without rip fence.
Absolutely flat
Easy levelling of the OFL3.0K by levelling screws in the insert plate. Optionally a frame for a permanent level adjustment can be purchased.
No drilling necessary
Mounting holes (countersunk) for quick installation are already pre-drilled.
Lasered scaling
Millimeter scaling on the surface for exact alignment of the rip fence.

Directly compatible and approved router motors:

AMB (Kress): 530 FM, 800 FME, 1050 FME
MAFELL: FM 800, FM 1000
SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAK 30 RF SPZ12
- If your motor is not listed, please check the tolerances of the clamping neck of your model as specified by the manufacturer or contact us.
MAFELL FM1650PV-LO not compatable

Compatible accessories

befestigungsplatten-nivellierrahmen-kreg-format-sauter-sa-99600024-01

Levelling frame for mounting plates in Kreg format

for levelling of mounting plates and OFLs in Kreg format | especially with softer table top material

Shipping within 24 hours (working days)

21,57 €

incl. VAT

Art.-Nr: SA-99600024

freifraesanschlag-mit-schutzschild-sauter-sa-rts-kit-01

Starter Pin with Protective Shield

Perfect accessory for all sauter OFL and ELP | Safely keeps fingers protected

Shipping within 24 hours (working days)

55,80 €

incl. VAT

Art.-Nr: SA-RTS-KIT

oberfraeslift-hoeheneinstellung-handkurbel-schwarz-sauter-sa-ofl-kurbel-black-01

Hand crank for sauter router lifts - Black Edition

Fine height adjustment for all sauter OFL router lifts | Allen Key Size 5

Shipping within 24 hours (working days)

19,56 €

17,61 €

incl. VAT

Art.-Nr: SA-OFL-KURBEL-BLACK

fraesschablone-einlegeplatten-sauter-sa-elp-fs-k-01

Template ELP-FS for insert plates - Kreg Format

For fixing and insert boards in KREG format | of MDF | for insert boards with dimensions 298 x 235 mm

Shipping within 24 hours (working days)

30,95 €

incl. VAT

Art.-Nr: SA-ELP-FS-K

ofl-befestigungsplatten-montagesatz-alu-20teilig-sauter-sa-99600005-01

Mounting kit aluminium

for the installation of mounting plates and OFLs | 20-piece set made of high-quality aluminium

Shipping within 24 hours (working days)

34,51 €

incl. VAT

Art.-Nr: SA-99600005

reduzierplattenset-sauter-sa-rp3.0-set-all-01

Reducing Plate Set for OFL3.0 - 6pcs

For the pivoting sauter router lift OFL3.0 | Oblong holes: 12 | 22 | 42 | 54 | 68 + round hole: Ø 32 mm

Shipping within 24 hours (working days)

67,19 €

60,46 €

incl. VAT

Art.-Nr: SA-RP3.0-SET-ALL

absaughaube-ofl3-sauter-he-ds1-01

sauter "DUSTSHIELD" Extraction Attachment for OFL3.0

Under-table extraction for the swivelling milling lift | Minimalist | Effective

Shipping within 24 hours (working days)

39,90 €

35,91 €

incl. VAT

Art.-Nr: HE-DS1

7 Products