Trimming cutters

Clean routing of protruding edges is possible with the Trimming cutters. There are 2- or 3-edged routing cutters, as well as routing cutter attachments with and without ball bearings, whereby the bearing can be mounted on the shank side or as standard. Trimming cutters with exchangeable bladess have screwed-on knives which are ground on both sides. This has the advantage that the blade can be turned.

Routing cutters with an axis angle perfectly remove any edge overhangs that may occur, for example, when gluing the edge. The axially negatively inclined knives change the cut to a pulling cut so that much better results can be achieved when cutting plastics or long-fibre woods.