Freud V-groove cutter

Category image

These V-groove cutters from Freud are used on high-speed routers. They are used for routing V-grooves and decorative grooves and are suitable as a 60° type cutter. They can also be used to chamfer hardwoods and panel materials.

Thanks to the proven Freud Perma-Shield® coating, the V-groove cutters have a long service life, protection against corrosion and are easier to clean. The carbide (HM) comes from the in-house development and production in Italy.

V-Groove Bit D:31,75mm R:16mm

V-Groove Bit D:31,75mm R:16mm

V-Groove bit | D31.75 | H51 | h16 | A8

V-Groove Bit D: 6mm R:6mm

V-Groove Bit D: 6mm R:6mm

V-Groove bit | D6 | H38.1 | h6 | A8

V-Groove Bit D:12,7mm R:10mm

V-Groove Bit D:12,7mm R:10mm

V-Groove bit | D12.7 | H44.4 | h10 | A8

V-Groove Bit D:9,5mm R:10mm

V-Groove Bit D:9,5mm R:10mm

V-Groove bit | D9.5 | H44.4 | h10 | A8

V-Groove Bit D:15,88mm R:12,5mm

V-Groove Bit D:15,88mm R:12,5mm

V-Groove bit | D15.88 | H56.5 | h12.5 | A12

V-Groove Bit D:19,05mm R:12,5mm

V-Groove Bit D:19,05mm R:12,5mm

V-Groove bit | D19.05 | H57.2 | h12.5 | A12

V-Groove Bit D:12,7mm R:12,7mm

V-Groove Bit D:12,7mm R:12,7mm

V-Groove bit | D12.7 | H50.8 | h12.7 | A8

V-Groove Bit D: 8mm R:8mm

V-Groove Bit D: 8mm R:8mm

V-Groove bit | D8 | H70 | h8 | A8

V-Groove Bit D:12,7mm R:11mm

V-Groove Bit D:12,7mm R:11mm

V-Groove bit | D12.7 | H54 | h11 | A8