oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-01

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-02

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-03

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-04

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-05

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-06

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-07

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-08

oberfraesenlift-schwenkbar-sauter-sa-ofl3.0-09

Pivoting Router Lift OFL3.0

Mechanical router lift OFL3.0 | pivots from -5° to 50° | for router motors with neck Ø 43 mm | exact fine height adjustment & magnetic reduction plates

Delivery time 2-3 days

709,49 €

incl. VAT / excl. shipping costs

Brand:sauter
Article no.:SA-OFL3.0
Weight:6.92kg

Technical Data

Dimension insert plate: 306 x 229 x 9 mm
Corner radius of insert plate: 6 mm
Height adjustment per rotation: 4 mm
Max. Adjustment travel: 101 mm
Height router lift (max. extended): 240mm
Max. Router bit diameter: 55 mm
Weight: approx. 5 kg

Properties & Advantages

Quality from Germany
Solid construction of high quality aluminium and steel.
Fine height adjustment to 1/10mm
Extreamle precise fine height adjustment, with exact scaling an effective spindle lock, conveniently operated via Allen screw.
Smooth-running columns
Enable a stepless and exact fine height adjustment.
Fits in (almost) every router table
Robust, anodised aluminium insert plate in the familiar outline dimensions of 306 x 229 mm and thus interchangeable with our previous insert plates (e.g. FO-RTS2 or T-RTI-PLATE).
Compatible to common router motors
The OFL3.0 is compatible with a wide range of commercially available motors with 43 mm Euro-neck. All models can be found below.
The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the router cutter - especially for small workpieces,"snagging and getting stuck" on the edge of the hole eliminated!
Routing also without rip fence
2 drill holes for the fence pin allow you to free rout round workpieces without rip fence.
Absolutely flat
Easy levelling of the OFL3.0 by levelling screws in the insert plate. Optionally a frame for a permanent level adjustment can be purchased.
No drilling necessary
Mounting holes (countersunk) for quick installation are already pre-drilled.
Lasered scaling
Millimeter scaling on the surface for exact alignment of the rip fence.

Additional recessed grip for easy changing of the reduction plates.
Magnets for mounting additional accessories are distributed over the entire reduction plate.

Compatible accessories

oberfraeslift-hoeheneinstellung-handkurbel-sauter-sa-ofl-kurbel-01

Hand crank for sauter router lifts

Fine height adjustment for all sauter OFL router lifts | Allen Key Size 5

Delivery time 2-3 days

19,56 €

incl. VAT

Art.-Nr: SA-OFL-KURBEL

freifraesanschlag-mit-schutzschild-sauter-sa-rts-kit-01

Starter Pin with Protective Shield

Perfect accessory for all sauter OFL and ELP | Safely keeps fingers protected

Delivery time 2-3 days

55,80 €

incl. VAT

Art.-Nr: SA-RTS-KIT

ofl-befestigungsplatten-montagesatz-alu-20teilig-sauter-sa-99600005-01

Mounting kit aluminium

for the installation of mounting plates and OFLs | 20-piece set made of high-quality aluminium

Delivery time 2-3 days

34,51 €

incl. VAT

Art.-Nr: SA-99600005

fraesschablone-einlegeplatten-sauter-sa-elp-fs-01

Template ELP-FS for insert plates

for mounting and insertion plates | made of MDF - for insert plates with dimensions 306 x 229 mm

Delivery time 2-3 days

30,95 €

incl. VAT

Art.-Nr: SA-ELP-FS

fraesschablone-buendigfraeser-sauter-set-fs-11651-01

Routing template for ELP & OFL incl Router Cutter

for insert plates and sauter router lifts | made of MDF - suitable for panel size 306 x 229 mm

Delivery time 2-3 days

80,13 €

incl. VAT

Art.-Nr: SET-FS-11651

sauter "DUSTSHIELD" Extraction Attachment for OFL3.0

Under-table extraction for the swivelling router lift | Minimalist | Effective

Delivery time 2-3 days

39,90 €

incl. VAT

Art.-Nr: HE-DS1

befestigungsplatten-nivellierrahmen-sauter-sa-99600006-01

Levelling frame for insert plates

for levelling of mounting plates and OFLs | For alignment in router table- especially with softer table top material

Delivery time 2-3 days

21,57 €

incl. VAT

Art.-Nr: SA-99600006

hoehenmessgeraet-digital-wixey-wx-wr525-01

Wixey Digital Height Gauge

Automatic measuring (1/1000mm) on the router lift | Ideal accessory for the sauter router lifts

Delivery time 2-3 days

84,89 €

incl. VAT

Art.-Nr: WX-WR525

fraeslift-einlegeplatte-kopierhuelsenadapter-sauter-sa-rp-gb-01

Guide Bush Adapter for sauter Lifts and Inserts

for stationary routing with guide bushes | use with US copy sleeves | for all sauter insert plates and lifts with steel reduction plates

Delivery time 2-3 days

29,90 €

incl. VAT

Art.-Nr: SA-RP-GB

9 Products

Discover now

Hand crank for sauter router lifts
Fine height adjustment for all sauter OFL router lifts | Allen Key Size 5
Delivery time 2-3 days
19,56 €
incl. VAT
Art.-Nr: SA-OFL-KURBEL
Starter Pin with Protective Shield
Perfect accessory for all sauter OFL and ELP | Safely keeps fingers protected
Delivery time 2-3 days
55,80 €
incl. VAT
Art.-Nr: SA-RTS-KIT
Mounting kit aluminium
for the installation of mounting plates and OFLs | 20-piece set made of high-quality aluminium
Delivery time 2-3 days
34,51 €
incl. VAT
Art.-Nr: SA-99600005
Template ELP-FS for insert plates
for mounting and insertion plates | made of MDF - for insert plates with dimensions 306 x 229 mm
Delivery time 2-3 days
30,95 €
incl. VAT
Art.-Nr: SA-ELP-FS

Pivoting Router Lift OFL3.0

Mechanical router lift OFL3.0 | pivots from -5° to 50° | for router motors with neck Ø 43 mm | exact fine height adjustment & magnetic reduction plates