Tormek MB-102 Multi Base

For flat bevelling and for better grinding of knives

Delivery time 2-3 days

77,64 €

incl. VAT / excl. shipping costs

Brand:Tormek
Article no.:TM-MB-102
Weight:0.9kg

Tormek MB-102 Multi Base

Enables the grinding of a perfectly flat bevel on the flat side of the diamond grinding disc and allows better access for sharpening knife edges.

When you sharpen on top of the curved part of the grinding wheel you get a slightly concave bevel. For some tools, a flat bevel is preferable. You can achieve this by sharpening against the flat side of your diamond grinding wheels.

Please note that sharpening on the side of the grinding wheel with the MB-102 Multi Base is recommended only with diamond grinding wheels. We don't recommend it for sharpening with grindstones as they wear down and require truing, which isn't possible on the side.

Technical Data

Size: W x D x H: 332 x 126 x 37 mm
Weight: 0.77 kg
Material: Precision die-cast zinc, black plastic knobs

Properties & Advantages

With the multi-holder, the universal support can be mounted vertically, allowing knife edges to be sharpened and honed with the direction of rotation, which is particularly useful with the soft Japanese waterstones.
The multi-holder has a joint so that the sharpening position can be ideally adjusted depending on the tool and fixture.
Grinding bevels that need to be absolutely flat can be ground on the grinding stone side using the multi-holder. ONLY recommended for diamond grinding discs, as these do not wear out and then need to be dressed.
Works with most Tormek grinding devices.
Tormek offers a 2-year guarantee on the multi-holder.
The MB-102 Multi Base can be used with most Tormek jigs. It is designed to work best with these jigs:
- KJ-45 Centering Knife Jig
- KJ-140 Wide Centering Knife Jig
- SVM-00 Small Knife Holder
- SE-77 Square Edge Jig
- SVS-38 Short Tool Jig
- SVD-186 R Gouge Jig
- SVS-50 Multi Jig
- SVD-110 Tool Rest