2nd choice - Pivoting Router Lift OFL3.0K - Red Edition
Replenishment is on the way
€709.49
Currently not available
- 1x Pivoting Router Lift OFL3.0
- 2x reduction plates long hole 16 and 32
- 1x reducing plate 68 mm
- 1x hexagon screwdriver 5x150 mm
- 4x fixing screws M6x50, washers and nuts
- 8x levelling screws M5x8
- 1x instruction manual English
Optional accessories:
- Mounting kit: 20-piece mounting kit with 4x corner plates, 4x countersunk screws and 12x wood screws (Item No. SA-99600005)
- Levelling frame: Sheet steel frame for plate levelling (Art.No. SA-99600006)
- Digital measuring instrument: Digital height measuring instrument for 1/1000mm accurate Routing Depth adjustment (Part No. WX-WR525)
- Fence with protective shield: Arched or free routing kit for routing without rip fence (Art. No. SA-RTS-KIT)
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a. Ammersee Germany
[email protected]
https://www.sautershop.de
Pivoting Router Lift OFL3.0 for your Router Table - Red Edition Why this router lift? Simple operation of the router lift
Demonstration model | Fully functional
For all those who already use a Kreg inlay plate and want to change to an OFL!
The first and only one of its kind - pivoting lift from -5° to 50°
The OFL3.0 for milling motors with 43 mm clamping neck including swivel mechanism as only professional tables have been able to do. Massive and well manufactured. Ideal for small workshops or due to low set-up and configuration times also ideal next to the large bench milling machine - Really Made in Germany!
Limited Editoin in Red. The perfect combination with the Harvey Router Table Top or the Woodpeckers super fence
- Pivots from -5° to 50°
- Classic snap-in points Classic snap-in points 0° | 15° | 22.5° | 30° | 45° | 90°
- No loss of routing depth!
- Easiest bit changes thanks to upward looking spindle and collet chuck!
- Innumerable routing possibilities - grooves, rebates, chamfers, mitre cuts, etc. - all with only 1 Slot Routing Cutter!
- Height adjustment via rotary handle above.
- Angle locking via a lever below.
- Centering in the slotted hole by means of two levers also below.
Technical data
-
Dimension insert plate
298 x 235 x 9 mm
-
Corner radius Insert plate
19.05 mm (3/4")
-
Height adjustment per rotation
4 mm
-
Max. Adjustment travel
74 mm
-
Height router lift (max. extended)
240mm
-
Max. Router bit diameter
55 mm
-
Weight
approx. 5 kg
Features & benefits
- Quality from Germany
Solid construction of high quality aluminium and steel. - Fine height adjustment to 1/10mm
Extreamle precise fine height adjustment, with exact scaling an effective spindle lock, conveniently operated via Allen screw. - Smooth-running columns
Enable a stepless and exact fine height adjustment. - Compatible to common router motors
The OFL3.0 is compatible with a wide range of commercially available motors with 43 mm Euro-neck. All models can be found below. - The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the router cutter - especially for small workpieces,"snagging and getting stuck" on the edge of the hole eliminated!
- Routing also without rip fence
2 drill holes for the fence pin allow you to free rout round workpieces without rip fence. - Absolutely flat
Easy levelling of the OFL3.0K by levelling screws in the insert plate. Optionally a frame for a permanent level adjustment can be purchased. - No drilling necessary
Mounting holes (countersunk) for quick installation are already pre-drilled. - Lasered scaling
Millimeter scaling on the surface for exact alignment of the rip fence.
Directly compatible and approved router motors:
- AMB (Kress): 530 FM, 800 FME, 1050 FME
- MAFELL: FM 800, FM 1000
- SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAK 30 RF SPZ12
- If your motor is not listed, please check the tolerances of the clamping neck of your model as specified by the manufacturer or contact us.
- MAFELL FM1650PV-LO not compatable
Compatible accessories
Under-table extraction for the swivelling router lift | Minimalist | Effective
Item no.: HE-DS1Delivery in 1-2 business days