Festool Cordless table saw CSC SYS 50 EBI-Plus
Replenishment is on the way
€2,340.65
% €2,538.31 (7.79% saved)
Currently not available
- 1x Festool Cordless table saw CSC SYS 50 EBI-Plus
- 1x SYS 18V 2x5.0/TCL 6 DUO energy set
- 1x Allen key SW 6
- 1x Circular saw blade WOOD FINE CUT HW 168x1,8x20 WD42
- 1x rip fence
- 1x push stick
- 1x Riving knife for concealed cuts
- 1x Riving knife with protective hood
- 1x chip collection bag
- 1x angular rip fence
Festool GmbH
Wertstraße 20 73240 Wendlingen a.N. Germany
[email protected]
https://www.festool.de/
Festool Cordless table saw CSC SYS 50 EBI-Plus
Sawing precision to go. the cordless table saw in Systainer format.
The CSC SYS 50 cordless table saw is so compact that it fits into a Systainer. As handy as its external dimensions are, it is surprisingly versatile in use: with parallel cuts of up to 280 mm, a cross-cut width of up to 450 mm and angle cuts of -2° to 47°. the unique digital operation delivers highly precise results down to a tenth of a millimetre. The 2x18 volt double battery system in combination with the brushless EC-TEC motor impresses with power and pulling force - you won't feel any difference to mains-powered machines. Together with the UG-CSC-SYS base frame, you have the perfect work table right at hand and transport from the vehicle to the work site is effortless. In short: sawing precision to go!
Technical data
-
Battery voltage
2 x 18 V
-
Idle speed
4,500 - 6,800 rpm
-
Mounting hole saw blade
20 mm
-
Angle of inclination
-10 - + 47
-
Cutting height 0°
0 - 48 mm
-
Cutting height 45°
0 - 34 mm
-
Cutting height -10°
21 - 32 mm
-
Mitre angle
0 - 70
-
Parallel cutting width
280 mm
-
Table height
280 mm
-
Dimensions (L x W x H)
512 x 396 x 296 mm
-
Dust extraction connection Ø
27/36 mm
-
Drive type
Battery
-
Battery capacity
5 Ah
-
Weight
15 kg
Features & benefits
- Versatile: Parallel cuts up to 280 mm; cross-cut width of up to 450 mm. Angle cuts from -2° to 47°.
- Practical: with a cutting height of up to 35 mm, even angled cuts of up to -10°; ideal for undercutting fitting strips.
- Compact and mobile: can be transported with one hand in the practical Systainer format. Even lighter with the UG-CSC-SYS base frame.
- Highest precision: Height and angle are set electrically at the touch of a button via the digital display - accurate to a tenth of a millimetre.
- Repeat accuracy: The height and angle settings (mm and inch) are parallax-free via the digital display, i.e. more accurate than any eye measurement. Repeatable cuts are guaranteed.
- Convenient: Four saw blade positions can be stored and selected via the digital display.
- High-precision rip fence: robust rip fence with double clamping (via only one clamping lever) for exact alignment and perfect cutting results.
- High-precision angle stop: angle stop is optimally aligned and centrally clamped via a groove on the sliding carriage. for mitre angles between -70° and +70°.
- Absolutely smooth: ball-bearing sliding carriage for parallel and angular cuts with maximum precision.
- Powerful: The brushless EC-TEC motor and dual-battery system with two 18-volt battery packs (from 4.0 Ah) ensure long running performance.
- Durable: The brushless EC-TEC motor is durable, robust and maintenance-free.
- Material-compatible work: with saw blades for every material; the speed preselection for material-compatible speed is made via the digital display.
- Low dust: dust collection bag for low-dust work even without extraction mobile.
- Healthy working in a system: also ideal in combination with Festool cordless vacuum cleaners.
- Compatible: fits together with the entire Festool Systainer system and the bott vehicle equipment.
- Flexible base frame: the UG-CSC-SYS base frame is the perfect transport solution to the work site and the ideal work table in one.
- Unique: three-year warranty also on battery packs and chargers.
- Suitable for cross-cuts up to 450 mm wide, precise and fast with the integrated sliding carriage.
- Suitable for lengthwise cuts up to a cutting height of 48 mm and a width of 280 mm with secure support on the integrated fold-out table.
- Suitable for angular cuts from -2° to 47° (-10° possible with limited cutting depth of 21 - 32 mm) thanks to tiltable saw blade.
- Precise height and angle adjustment by means of electric stepper motors. Adjustable to within 0.1 mm and controllable via display.
- Practical to transport in handy Systainer format.
Compatible accessories
Dust-free working with the CSC SYS 50.
Item no.: F-577984Delivery in 1-2 business days
For TS 60 K, CSC-SYS 50
Item no.: F-205763Delivery in 1-2 business days
For TS 60 K, CSC-SYS 50
Item no.: F-205765Delivery in 1-2 business days
For TS 60 K, TSV 60 K, CSC SYS 50
Item no.: F-578568Delivery in 1-2 business days
For TS 60 K, TSV 60 K, CSC SYS 50
Item no.: F-578566Delivery in 1-2 business days
For TS 60 K, CSC-SYS 50
Item no.: F-205767Delivery in 1-2 business days
For TS 60 K, TSV 60 K, CSC SYS 50
Item no.: F-578567Delivery in 1-2 business days
For TS 60 K, CSC-SYS 50
Item no.: F-205766Delivery in 1-2 business days
For the CSC SYS 50 Table Saw | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: F-577001Delivery in 1-2 business days
For TS 60 K, CSC-SYS 50
Item no.: F-205764Delivery in 1-2 business days