Pivoting Router Lift OFL3.0K

Pivoting Router Lift OFL3.0K in KREG format - pivot-5-° to 50-° | for router motors with neck holder Ø 43 mm | exact height fine adjustment & magnetic reduction plates

Delivery in 1-2 business days

€709.49

Brand: sauter

Item no.: SA-OFL3.0K

Weight: 6.96 kg

Scope of delivery

1x Pivoting Router Lift OFL3.0K
2x reduction plates long hole Ø 16 and 32
1x reducing plate Ø 68 mm
1x hexagon screwdriver 5x150 mm
1x instruction manual (German)

Manufacturer

Manufacturer:
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a.Ammersee Germany
[email protected]

EU representative:
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a. Ammersee Germany
[email protected]
https://www.sautershop.de

Pivoting Router Lift OFL3.0K for your Router Table Why this router lift? Simple operation of the router lift

For all those who already use a Kreg inlay plate and want to change to an OFL!

The first and only one of its kind - pivoting lift from -5 to 50 degrees

The OFL3.0K - the variant in the Kreg insert plate format - for router motors with 43 mm clamping neck including swivel mechanism that only professional tables use. Solid and great workmanship. Ideal for small workshops or, due to short set-up and configuration times, also ideal next to the large spindle moulder -Genuinely Made in Germany!

Pivots from -5° to 50°
Classic snap-in points 22.5°, 30°, 45° and 90°
No Routing Depthloss!
Easiest cutter change thanks to upward looking spindle and collet chuck!
Innumerable routing possibilities - grooves, Rebating, chamfers, mitre cuts, etc. - all with only 1 Slot Routing Cutter!

Height adjustment via rotary handle above.
Angle locking via a lever below.
Centering in the slotted hole by means of two levers also below.
Here we go.

Directly compatible and approved milling motors:

AMB (Kress): 530 FM, 800 FME, 1050 FME
MAFELL: FM 800, FM 1000
SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAK 30 RF SPZ12
- If your motor is not listed, please check the tolerances of the clamping neck for your model as specified by the manufacturer or contact us.
MAFELL FM1650PV-LO not compatable

-----------------------------------------------------------------------------------------

Optional accessories:

Height gauge: High-quality, magnetic setting gauge for tool-free operation with scale (Art. No. SA-99600004)
Mounting kit: 20-piece mounting kit with 4x corner plates, 4x countersunk screws and 12x wood screws (Item No. SA-99600005)
Levelling frame: Sheet steel frame for plate levelling (Art.No. SA-99600006)
Digital measuring instrument: Digital height measuring instrument for 1/1000mm accurate Routing Depth adjustment (Part No. WX-WR525)
Milling fence with protective shield: Arched or freemilling kit for Routing without rip fence (Art. No. SA-RTS-KIT)
Compensation pieces for -Precision insert Router Tableplate: four Insert plate compensation pieces for Kreg insert plates PRS4034 / PRS 4038 (Art.No. KR-PRS3040)

Technical data

Dimension insert plate
298 x 235 x 9 mm
Corner radius Insert plate
19.05 mm (3/4")
Height adjustment travel/rotation
4 mm
Max. Adjustment travel
101 mm
Height milling lift (max. extended)
240mm
Max. Cutter diameter
55 mm
Weight
approx. 5 kg

oberfraesenlift-schwenkbar-kreg-format-sauter-sa-ofl3.0k-02

Features & benefits

Quality from Germany
High quality, solid construction. Construction of high quality aluminium and steel.
Fine height adjustment to 1/10mm
Height fine adjustment extremely precise adjustable, with exact scaling and effective spindle lock, conveniently operated via hexagon socket screw.
Smooth-running spindle columns
Enable a stepless and exact fine height adjustment.
Compatible to common Routing
The OFL3.0K is compatible with a wide range of commercially available milling motors with 43 mm Euro-neck. All models can be found below.
Safe Routing for any diameter
The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the milling cutter - especially for small workpieces, a "snagging and getting stuck" on the edge of the hole eliminated!
Assembly made easy
Simple mounting of the milling cutter to the mounting adapter.
Routing also without rip fence
2 drill holes for the fence pin allow you to free e.g. round workpieces without rip fence (see optional accessories separately - not in Delivery Includes).
Absolutely flat
Simple levelling of the OFL3.0K by means of levelling screws in the insertion plate. Optionally a frame for a permanent level adjustment can be purchased.
No own drillings necessary
Mounting holes (countersunk head) for quick Router Tableinstallation are already pre-drilled.
Lasered scaling
Millimeter scaling on the surface for exact alignment of the rip fence.
Additional recessed grip for easy changing of the reduction plates.
Magnetism for mounting additional accessories is distributed over the entire reduction plate.