In a 2-part set for more precision and repeatability on the workbench
Extra-long workpiece fence for stable support and perfect alignment of workpieces, supplemented with the perfectly matching stop. The flattened side of the stop allows workpieces to be supported even below the guide rail (from 8 mm material thickness) - is therefore particularly helpful for smaller workpieces.
to be attached to the sauter magnetic bench dogs | Compatable with Festool, Makita & Triton guide rails
Shipping within 24 hours (working days)
35,85 €
incl. VAT
Art.-Nr: SA-VB-MAG-KIT
6 Products
Technical Data
Size of fence: 900 x 40 x 11.8 / 7.8 mm
Material fence: anodised aluminium
Size stop: 85 x 40 x 24 mm
Material stop: POM, brass
Properties & Advantages
Bore scheme compatible with the 0° to 4° bores of the large Vario-Bench plate (1200 x 800 mm).
Especially for shorter workpieces that cannot be attached tbetween two bench dogs, the continuous fence is an advantage
Compatible with all Ø 20 mm hole grid / multifunction tables with 100 mm or 96 mm (e.g. Festool) hole spacing in 0°, 45° and 90° angles
Due to the elongated holes, the fence also fits with non-exact hole spacing of 96 mm or 100 mm
Flattened at one end to easily process thin material up to 8 mm
In combination with the stop (SA-VB-RIDER), the repeatable machining of several workpieces (e.g. formatting to the same size) is easy
Perfectly matched to the diameters of the Vario-Bench bench dogs
The fence can also be used for precise alignment of tools at squares to a workpiece edge, e.g. for flat dowel routing in the surface of the workpiece (for workpieces up to 60 cm wide)
Stop with intelligent eccentric clamp made of brass
Compatible with the low-profile bench hooks (SA-VB-BDOG-LOW) - the stop then does not hit against them
the perfect set for the start with the Vario-Bench | consisting of: MDF worktop incl. 4 magnetic bench dogs (2 pairs) | suitable for the Festool guide rail system
Router Sled | Centering laser | Side laser | Clamping set | Wall mount | Hose guard | Extraction adapter | Lifting Table | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
With Scoring mode for tear-free cutting | Power 1,300 watts | Max. Cutting capacity at 0-° 56 mm | speed variable 2.000 - 6.400 rpm | Delivery in MAKPAC size 4 | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
the complete set with perforated plate, base frame and 4x bench dogs | Dimensions perforated plate: 1200 x 800 mm | very variable, intelligent and patented
