Routing
Router Bits
8 mm Router Bits
Trimming cutters
Trimming Cutters - Ball bearing on shaft

Trimming Cutters - Ball bearing on shaft

Category image

A speciality are trimming cutters with a ring mounted on top of the shank. These routing cutters are particularly suitable for working with templates. The ring guides the routing cutter flush along the template. After the ball bearing has been mounted on the shaft side, the edges are milled so that they are cleanly flush. Ideal also as Template cutters, e.g. for curved workpieces.

Trimming Router Cutter with KL at ShankØ 19 mm

Trimming Router Cutter with KL at ShankØ 19 mm

D: 19 mm | L: 64 mm l B: 11 mm

Trimming Router Cutter with bearing Ø25 mm S8

Trimming Router Cutter with bearing Ø25 mm S8

D: 25 mm | NL: 25 mm | S: 8 mm

Trimming Cutter D 22 mm

Trimming Cutter D 22 mm

D 22 mm | NL 25 mm | GL 64 mm | S 8 mm | SL 32 mm

Trimming Router Cutter with bearing Ø12.7 mm S6

Trimming Router Cutter with bearing Ø12.7 mm S6

D: 12.7 mm | NL: 9.5 mm | S: 6 mm

Trimming Cutter D 16 mm

Trimming Cutter D 16 mm

D 16 mm | NL 32 mm | GL 77 mm | S 8 mm | SL 33 mm

Trimming Cutter D 15 mm

Trimming Cutter D 15 mm

D 15 mm | NL 25 mm | GL 68 mm | S 8 mm | SL 32 mm

Trimming Router Cutter with KL at ShankØ 25,4 mm

Trimming Router Cutter with KL at ShankØ 25,4 mm

D: 25.4 mm | L: 95 mm l W: 45 mm

Trimming Router Cutter with bearing Ø25 mm S12

Trimming Router Cutter with bearing Ø25 mm S12

D: 25 mm | NL: 25 mm l S: 12 mm

Trimming Router Cutter with bearing Ø19 S12

Trimming Router Cutter with bearing Ø19 S12

D: 19 mm | NL: 50 mm | S: 12 mm

Trimming Cutter D 20 mm

Trimming Cutter D 20 mm

D 20 mm | NL 25 mm | GL 69 mm | S 8 mm | SL 32 mm

Trimming Cutter D 14 mm

Trimming Cutter D 14 mm

D 14 mm | NL 25 mm | GL 68 mm | S 8 mm | SL 32 mm

Trimming Cutter D 16 mm

Trimming Cutter D 16 mm

D 16 mm | NL 25 mm | GL 62 mm | S 8 mm | SL 32 mm

Top Bearing Flush Trim Bit D: 22mm R:20mm

Top Bearing Flush Trim Bit D: 22mm R:20mm

Top bearing flush trim bit | D22 | H60 | h20 | A8

Flush cutter carbide "mini" Ø: 6.4 mm

Flush cutter carbide "mini" Ø: 6.4 mm

D: 6.4 mm | NL: 19 mm | GL: 62 mm | S: 6 mm

Festool Edge trimming cutter HW S8 D19/NL25

Festool Edge trimming cutter HW S8 D19/NL25

Shank: 8 mm | D: 19.05 mm | NL: 25 mm | GL: 62 mm

Trimming Cutter D 14 mm

Trimming Cutter D 14 mm

D 14 mm | NL 19 mm | GL 62 mm | S 8 mm | SL 32 mm

Trimming Cutter D 12 mm

Trimming Cutter D 12 mm

D 12 mm | NL 19 mm | GL 62 mm | S 8 mm | SL 38 mm

Trimming Cutter D 24 mm

Trimming Cutter D 24 mm

D 24 mm | NL 25 mm | GL 72 mm | S 8 mm | SL 32 mm

Trimming Cutter D 12,7 mm

Trimming Cutter D 12,7 mm

D 12,7 mm | NL 19 mm | GL 55 mm | S 8 mm | SL 32 mm

Mini Flush Trim Bit With Upper Ball Bearing Ø: 4.8 mm

Mini Flush Trim Bit With Upper Ball Bearing Ø: 4.8 mm

D: 4.8 mm | NL: 12 mm | GL: 51 mm | S: 6 mm

Trimming Router Cutter with ball bearing at shank Ø 19 mm

Trimming Router Cutter with ball bearing at shank Ø 19 mm

D: 19 mm | L: 77 mm l W: 25.4 mm

Trimming Cutter D 12,7 mm

Trimming Cutter D 12,7 mm

D 12,7 mm | NL 25 mm | GL 62 mm | S 8 mm | SL 32 mm

Trimming Cutter D 15 mm

Trimming Cutter D 15 mm

D 15 mm | NL 19 mm | GL 62 mm | S 8 mm | SL 32 mm

Flush cutter carbide "mini" Ø: 8 mm

Flush cutter carbide "mini" Ø: 8 mm

D: 8 mm | NL: 19 mm | GL: 62 mm | S: 8 mm

Trimming Cutters - Ball bearing on shaft

A speciality are trimming cutters with a ring mounted on top of the shank. These routing cutters are particularly suitable for working with templates. The ring guides the routing cutter flush along the template. After the ball bearing has been mounted on the shaft side, the edges are milled so that they are cleanly flush. Ideal also as Template cutters, e.g. for curved workpieces.

D= Diameter | NL= Effective length | KL= Ball bearing | SL= Shaft length | GL= Total length | S= Shank