Our experts are here for you!
+49 (0) 8152 92898-0
info@sautershop.com
Routing
Router Bits "The Red Routers" by Freud Freud Flush Trim Cutters

Freud Flush Trim Cutters

Freud Flush Trim Cutters precisely ground to the ball bearing diameter for exact edge processing and for working with templates.

These flush trim cutters from Freud are also suitable for machining plastics, such as acrylic glass. Thanks to the well-known Freud Perma-Shield® coating, they have a long service life, corrosion protection, signal colour and are easier to clean. The carbide (HM) comes from the in-house development and production in Italy.

More Information

8 Article found

The Freud Flush Trim Cutters - the tool for edge processing

The flush trim cutters, which belongs to the group of wood cutters, is used to cleanly mill off protruding edges.

Router bits in different versions

Among the flush trim cutters there are two- or three-edged cutters, as well as cutter attachments with and without ball bearings, whereby the thrust bearing can be mounted on the shaft side or as standard.

Choosing the right size

When choosing a flush trim cutters, make sure you have the right shank diameter, with 8 mm and 12 mm being the most common sizes. Here you will find all flush trim cutters with 12 mm shank. Other important specifications are the diameter, the shank length and the effective length. The individual dimensions are explained pictorially in the respective categories.