Benchdog Tools 346 Quad Hole Jig MK4
Available from 25.10.2026
€79.67
- 1x 346 quad hole jig MK4
- 2x 20mm Quad bases
- 2x M6x25 countersunk fixings
- 1x 4mm hex key
Benchdog Tools
Unit 1, Walronds Park, Isle Brewer Ta3 6QP Taunton United Kingdom
[email protected]
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a.Ammersee Germany
[email protected]
https://www.sautershop.de/
Benchdog Tools MFT Hole Jig 346 Quad Hole Jig MK4
The MK4 hole jig sets the fixing holes for the Quad MFT hinge system and compatible fences precisely and repeatably — without relying on existing holes.
Additional 80mm and 96mm holes and threaded holes for alignment pins allow seamless alignment against the edge of the panel material. Position the jig using a 30mm guide bush and a 20mm router (not included), tighten the quad bases evenly, then rout. For MFT tops with 20mm holes on a 96mm spacing.
Technical data
- For MFT tops with 20mm holes on a 96mm spacing
- Holes spaced at 32mm, 48mm, 64mm, 80mm, 96mm
Features & benefits
- The 80mm and 96mm holes and the threaded holes for alignment pins allow seamless alignment against the edge of your panel material, simplifying the drilling process without relying on existing holes
- Use a 30mm guide bush and a 20mm router (not included), position the jig at the required spot in the existing holes, tighten the quad bases evenly, and get started
You may also like
Includes 346 MK4 hole jig & Systainer | For Festool guide rails
Replenishment is on the way
Includes 346 MK4 hole jig | For Festool guide rails
Available from 25.10.2026
Precise, repeatable hinge alignment | No extrusion needed | For Festool guide rails
Available to order expected from 25.08.2026