Drilling & Screws Outlet

Screwdriver bits with 25 mm length | Phillips | Pozidriv | Torx | hexagon socket | bit holder

for CXS/TXS 12, CXS/TXS 18, TPC 18/4, TDC 18/4, C 18 and T 18 with FastFix support (not for CXS/TXS)

for 1/4" (6.35 mm) bits | extremely strong mag. hold | length: 68 mm

D: 2,5 mm-  |-  SØ: 6,35 mm-  |-  L: 36 mm-  |-  Gewinde: M3

in a plastic case | D 4-5-6-8-10 mm

The flagship pocket hole drilling jigs from Kreg® for material thicknesses from 13 to 38 mm | efficient, innovative and robust

Multi-purpose hole saw with carbide teeth| For wood and wood-based materials, abrasive materials and PVC plastics | Ø 68 and 83 mm | incl. hole countersink Ø 73 mm

25-piece in plastic box | Ø 1 to 13 mm | 0.5 mm increasing

AØ: 2.0 mm | SØ: 2.0 mm | NL:- 22 mm | GL:- 49 mm

with neodymium magnet | without clamping ring |- length: 58 mm

Drill short for wood f. D 32 - 330 mm | from HSS | L: 186 mm | S: 10 mm

AØ: 17 mm | NL: 50 mm

Fast screw connections with one tool | Combined Drill - Countrsink - Screwdriver Bit

Optimum chip removal even for deep holes - thanks to deep-hole spiral | Ø 3.0 to 10.5 mm | 0.5 mm graduation | HSS-G quality | 16 pcs.

Countersink set with variable depth stop

with neodymium permanent magnet | with C-ring |- length: 58 mm

in a wooden box | Drill bit Ø: 15, 20, 25, 30, 35 mm

with neodymium permanent magnet | with C-ring |- length:- 75 mm

AØ: 4 mm | SØ: 6,3 mm | GL: 40 mm

Ø 6-8-10-12-14-16mm | Systainer³ SYS3 S 76 | Centrotec Interface

with neodymium permanent magnet | with C-ring | length: 100 mm

AØ: 5,5 mm | SØ: C 6,3 mm | NL: 68 mm | GL: 93 mm

Simple and fast working in System 32 | Drill hole lines Concealed Hingeand mark Rafix connectors

AØ: 5 mm | SØ: 6,3 mm | GL: 50 mm