Our specialist advisors are here for you!
+49 (0) 8152 92898-0
[email protected]
Go to homepage

Language

Wishlist
Cart
Sautershop consultant Expert consultation
Skip image gallery
anschlagverlaengerung-benchdog-tools-bd-bd0119-01
anschlagverlaengerung-benchdog-tools-bd-bd0119-02
anschlagverlaengerung-benchdog-tools-bd-bd0119-03
anschlagverlaengerung-benchdog-tools-bd-bd0119-04
anschlagverlaengerung-benchdog-tools-bd-bd0119-01
anschlagverlaengerung-benchdog-tools-bd-bd0119-02
anschlagverlaengerung-benchdog-tools-bd-bd0119-03
anschlagverlaengerung-benchdog-tools-bd-bd0119-04

Benchdogs CSC Fence and Adaptor Plate 990mm

Upgrade for the Festool CSC SYS 50 Table saw | With Flip Stop

Delivery in 1-2 business days

€289.00

Brand: Benchdog Tools
Item no.: BD-BD0119
Weight: 3.5 kg
  • 1 x Machined Aluminium Adaptor Plate
  • 1 x Fence 990mm - supplied in 3 x 330mm sections
  • 3 x Flag Stops
  • 1 x Guard Lifter 2 x Stainless Steel Thumbscrews
  • 2 x M6 T-Nuts
  • 1 x Material Support Plate with fixings
  • 6 x joiners
  • 1 x M6 x 25 Thumbscrew
  • 1 x Tanos M112 with Foam Insert
Manufacturer:
Benchdog Tools
Unit 1, Walronds Park, Isle Brewer Ta3 6QP Taunton United Kingdom
[email protected]
EU representative:
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a.Ammersee Germany
[email protected]
https://www.sautershop.de/

Benchdogs CSC Fence and Adaptor Plate 990mm

Practical Upgrade for the Festool CSC SYS 50 Cordless Table Saw 

 

Technical data

  • Length 990mm
anschlagverlaengerung-benchdog-tools-bd-bd0119-02

Features & benefits

  • Allows easily repeatable cuts on the table saw
  • Simple installation in minutes
  • Laser markings
  • Multiable flag stops can be used if necessary 
  • Guard lifted makes sure the fence glides smoothly under the blade guard
  • Support plate is included to support longer workpieces

⚠️ SAFETY WARNING – CSC Fence System

When using the 990 mm CSC Fence System there is an increased risk of saw tipping due to the extended length of the fence. To ensure safe and stable operation:

  1. Secure the Saw – Always ensure your saw is firmly mounted and locked in position before use.
     
  2. Work on a Stable Surface – Place the saw and fence system on a flat, stable surface to minimize movement.
     
  3. Support Longer Materials – When cutting longer or larger workpieces, use additional material supports to maintain balance and reduce strain on the fence.
     
  4. Maintain Proper Alignment – Verify that the fence is aligned correctly and firmly secured to prevent lateral movement.
     
  5. Use Caution During Operation – Avoid applying excessive lateral pressure to the saw, as this may increase the risk of tipping.