Klein

Tine cutter D 19 mm

E: 14° | D: 19 mm | B: 19 mm | L: 55 mm

Ball bearing "Delrin" for Corian milling cutter Ø 28.6 mm

D: 28.6 mm | d: 15 mm | H: 5 mm

Grub screw M3 x 2.5 mm

With flat tip

Upstand bit for Corian, NL 40, R6

D: 39 mm | R: 6 mm | R1: 3 mm | NL: 40 mm | S: 12 mm

Variable countersink Ø 6 - 10 mm

Countersink for drill bits with Ø 6 - 10 mm | 90° (2x 45°)

Compression Cutter Z2+2 - Ø8mm Double Bearing - Solid Carbide

Perfect edges for flush routing | spiral down- & up-cut | better stability thanks to double ball bearing | Z 2+2

KleinDia finishing cutter Z2 for Corian, Ø8mm

D: 8 mm l NL: 35 mm l SL: 40 mm l GL: 80 mm l Right-hand twist

Schwallrandfräser für Corian Ø 25,4 mm

Adjustable grooving cutterhead for tenons Ø 250 mm

For precision tenons 8 to 15 mm | 4 main and 4 pre-cutting edges made of carbide (Z4+4) | Approved for manual feed

Clamping ring D 20 mm

OD 20 mm | ID 12.7 mm | H: 6 mm

Compression Cutter Z2+2 - Ø12mm Double Bearing - Solid Carbide

Perfect edges for flush routing | spiral down- & up-cut | better stability thanks to double ball bearing | Z 2+2

Cove bit with upper ball bearing guide for Corian R10

D: 28.6 mm | R: 10 mm | NL: 13 mm | S: 12 mm

Variable countersink Ø 3 - 7.2 mm

Countersink for drill bits with Ø 3 - 7.2 mm | α: 90° (2x 45°)

Upstand bit for Corian, for Corian, NL 55, R6

D: 39 mm | R: 6 mm | R1: 3 mm | NL: 55 mm | S: 12 mm

Rebate router cutter set with 4 ball bearings - D 35 mm

D: 35 mm | W: 13 mm | H: 11 mm | L: 51 mm | Rebate depths: 7.9 / 9.5 / 11.1 / 12.7 mm