CMT Chamfering Cutter with Ball Bearing A=10°, Ø28.58mm
Available from 02.09.2026
€76.22
- 1x CMT Chamfer Router Bit with Bearing A=10°, Ø28.58 mm
IGM nástroje a stroje s.r.o.
Ke Kopanině 560 25267 Tuchoměřice Czech Republic
[email protected]
https://igmtools.de/
CMT Chamfering Cutter Ball Bearing A=10°, Ø28.58mm
The CMT chamfer router bit with bearing A=10°, Ø28.58 mm is a branded product from CMT Orange Tools (Italy). With a diameter of 28.58 mm and a 12 mm shank equipped with bearing guidance, this bit is specifically designed for edge chamfering.
The tungsten carbide-tipped cutting edges ensure precise, tear-free cuts and remain sharp even under heavy use.
Technical data
-
Diameter
Ø28.58 mm
-
Shank
Ø12 mm
-
Cutting edges
Z=2
-
Angle
10°
-
Guidance
with bearing
-
Cutter material
Tungsten carbide (HM)
Features & benefits
- Carbide-tipped cutting edges (HM/HW) for long service life and lasting sharpness
- Precision machining for clean, chip-free cuts
- Ball bearing guidance for accurate profile tracking without scoring
- Shank Ø12 mm – compatible with standard hand-held and table routers
You may also like
Profile cutter with ball bearing for larger round-over radii | Ø54mm | 12mm shank, R=12.7mm, A=18°
Available from 02.09.2026
Adjustable profile cutter with double radius R2+R3 | Ø34 x 31.75mm | 12mm shank
Available from 02.09.2026
For milling bowl-shaped recesses, 15° flank angle | Ø50.8 x 19mm | 12mm shank
Available from 02.09.2026
Combined profile cutter for round-over and chamfer in one pass | Ø38.1 x 31.75mm | 12mm shank, Z=2
Available from 02.09.2026
For milling bowl-shaped recesses, 15° flank angle | Ø50.8 x 25,4mm | 12mm shank
Available from 02.09.2026
Profile cutter with ball bearing for rounding over edges | Ø28.7 x 15 x 62mm | 12mm shank, R=8mm
Available from 02.09.2026
Profile cutter with ball bearing for chamfering edges | Ø31.75 x 22mm | 12mm shank, Z=2
Available from 02.09.2026