CMT Dowel Drill, Ø5mm, 8x20mm shank
Available from 23.09.2026
€14.87
- 1x CMT dowel drill bit, Ø5mm, shank 8x20mm
IGM nástroje a stroje s.r.o.
Ke Kopanině 560 25267 Tuchoměřice Czech Republic
[email protected]
https://igmtools.de/
CMT Dowel Drill, Ø5mm
CMT dowel drill bit, Ø5mm, shank 8x20mm is a high-quality product from CMT Orange Tools (Italy). With a diameter of 5mm and shank dimensions of 8x20mm, this bit is designed for precise flat dowel and hole dowel joints.
The carbide-tipped cutting edges ensure a precise, tear-free cut and remain sharp even during intensive use.
Technical data
-
Diameter
Ø5 mm
-
Shank
Ø8 mm, clamping length 20 mm
-
Cutting edges
Z=2
-
Cutting material
Carbide (HM/HW)
Features & benefits
- Carbide-tipped cutting edges for long service life and enduring sharpness
- Precision ground for clean, tear-free cuts
- Shank Ø8mm – compatible with common handheld and table routers
You may also like
For dowel joints | Ø3mm | 8x20mm shank
Available from 23.09.2026
For dowel joints | Ø7mm | 8x20mm shank
Available from 02.09.2026
For dowel joints | Ø5.55mm | 8x20mm shank
Available from 02.09.2026
For dowel joints | Ø8mm | 8x20mm shank
Available from 23.09.2026
For dowel joints | Ø10mm | 8x20mm shank
Available from 23.09.2026
For dowel joints | Ø5mm | 8x20mm shank
Available from 02.09.2026
For dowel joints | Ø6.35mm | 8x20mm shank
Available from 02.09.2026
For dowel joints | Ø6mm | 8x20mm shank
Available from 23.09.2026
For dowel joints | Ø7mm | 8x20mm shank
Available from 02.09.2026
Predecessor item
Dowel Drill | D: 5 mm | L: 30 mm | S: 8 mm
Replenishment is on the way