CMT Trimming Cutter Triangular Bearing, Ø12.7mm, 8mm shank
Available from 02.09.2026
€32.15
- 1x CMT Flush Trim Router Bit with Triangular Delrin Bearing, Ø12.7mm, Shank 8mm
IGM nástroje a stroje s.r.o.
Ke Kopanině 560 25267 Tuchoměřice Czech Republic
[email protected]
https://igmtools.de/
CMT Trimming Cutter Triangular Bearing, Ø12.7mm
CMT Flush Trim Router Bit with Triangular Delrin Bearing, Ø12.7mm, Shank 8mm is a quality product from CMT Orange Tools (Italy). With a diameter of 12.7mm and an 8mm shank, guided by a bearing, this bit is specifically designed for flush trimming along a template.
The carbide-tipped cutting edges ensure precise, tear-free results and remain sharp even under intensive use.
Technical data
-
Diameter
Ø12.7 mm
-
Shank
Ø8 mm
-
Cutting edges
Z=2
-
Bearing guide
Yes
-
Cutting material
Carbide (HM/HW)
Features & benefits
- Carbide-tipped cutting edges (HM/HW) for long tool life and durable sharpness
- Precision ground for clean, tear-free cuts
- Ball-bearing guidance for precise profile accuracy without marking
- Shank Ø8mm – fits standard handheld and table routers
You may also like
For flush trimming along a template | Ø19.05mm | 8mm shank
Available from 02.09.2026
For flush trimming along a template | Ø12.7mm | 8mm shank
Available from 02.09.2026
For flush trimming along a template | Ø19.05mm | 8mm shank
Available from 02.09.2026
For flush trimming along a template | Ø12.7mm | 8mm shank
Available from 02.09.2026