Mekanika Pro L

Technical data

• <strong>SIZE AND PERFORMANCE
• Total size (L)
  1370x1370x600 mm
• Work surface X/Y (L)
  1030x1030 mm
• Z-spacing/height (standard/high Z)
  133 mm/230 mm
• Maximum material thickness that can be cut completely (standard/high Z)
  65 mm/90 mm
• Typical cutting parameters (softwood)
• Feed speed
  5000 mm/min
• Cutting depth
  4 mm
• Spindle speed
  18,000 rpm
• Carbide cutter 3 cutting edges 6 mm

Maximum travelling speed

10,000 mm/min

Typical cutting accuracy

0.1 mm (this value depends heavily on the tool and cutting parameters selected by the operator)

Positioning accuracy

± 50 µm / 300 mm

Spindle

AMB 1400 FME-P Di ER16 (1400 W)

Mekanika VFD 2.2kW ER20 spindle

Power consumption

1x 230VAC (max. power: 650W without spindle)

<strong>MECHANICS

Structure

Steel plates (8mm)

Aluminium profiles (30x60mm & 60x60mm)

Linear guide system

HGR20 double prismatic rail

X- and Z-axis drive system

Ball screws 16 mm ±50 µm / 300 mm (C7)

Y-axis drive system

Two ball screws 16 mm ±50 µm / 300 mm (C7)

<strong>ELECTRONICS

Motors

Nema23, 5 A, 2.2 Nm (4x)

Motors Driver

32-bit DSP

48 VDC 6.0 A

Microstep operation 1/32

No-load current control

Speed smoothing coefficient (acceleration/deceleration)

Embedded computer

Raspberry Pi 4 - 2 GB RAM

Ports

3 USB ports

1 Ethernet port

1 HDMI port

Connectors

Neutrik XLR (motors and sensors)

GX12 (inputs/outputs)

Interface unit

7" TFT IPS capacitive touchscreen

Customised Bluetooth keyboard

Connectivity

WiFi (2.4 GHz and 5.0 GHz IEEE 802.11ac )

Bluetooth (5.0)

Gigabit Ethernet

Limits sensors

Inductive sensors (6x)

Tool length sensor

Touch plate with crocodile clip

Controller

PlanetCNC Mk3/4

<strong>CONTROL SOFTWARE

PlanetCNC TNGv2

Embedded G-code generator/editor

Toolpath visualisation

Import of toolpaths from 2D files (dxf, png,...)

Advanced motion interpolation

Simulation mode

Manual data input mode (MDI)

Automatic homing and square portal

Automatic tool length measurement and probing

Feed and speed override

Customisable view, scripts and M-codes

CAM compatibility

Compatible with any CAM software available on the market (recommendation<a href="/en-int/vectric-vcarve-pro-cad-cam-software-ve-vcarve-pro">

Vectric VCarve PRO; Fusion360)

<strong>SAFETY

Spindle

The DI spindles are automatically stopped when an emergency stop button is pressed or a milling programme is finished.

This minimises the time it takes for a sharp end mill to rotate.

DI spindles are optional products.

Enclosure (optional)

The enclosure provides a safe environment around the CNC where nothing can enter while the CNC is running.

The doors are monitored and opening them automatically leads to an emergency stop of the machine and the DI spindle.

The enclosure is an optional product.

<strong>Required assembly time (estimated)

16 hrs.