MicroJig MatchFit CNC Workholding Kit
Delivery in 1-2 business days
€139.90
- 3x Edge Guide
- 2x Ring Clamp
- 2x Ramp Clamp
- 4x U-Pad Clamp
- 1x Nylon mounting hardware
- 1x FREE Spoilboard plans
Micro Jig, Inc.
1065E.SR 434, BOX 195607 32708 Winter Springs, FL USA
[email protected]
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a.Ammersee Germany
[email protected]
https://www.sautershop.de/marke/MICROJIG
- User manual 1 (PDF, DE)
MicroJig MatchFit CNC Workholding Kit
Clamping devices for almost all requirements on CNC milling machines.
Discover the unparalleled innovation of the MatchFit CNC Workholding Kit. Its ingenious low-profile design enhances your woodworking without obstructing your tools. This is the only clamping system utilizing the MatchFit Dovetail System to securely hold stock while you work on your CNC, clamping table, jig, or fixture.
Most CNC machines come with minimal clamping solutions, often just two basic hold-down clamps, if any. This leaves you to figure out how to hold parts securely. Say goodbye to double-faced tape. Microjig provides a comprehensive system for quickly and securely holding your work on your CNC, no matter the cuts you need to make.
Technical data
-
Material
ABS plastic
-
Axial displacement, edge stops
+/- 25 mm
-
Clamping width ring clamps
> 2 mm
-
Clamping width ramp clamps
approx. 13 mm
-
Clamping height of U-clamps
1.5 - 28 mm
Features & benefits
- Provides multiple secure clamping options for virtually all benchtop CNC needs.
- Works with most sizes, models, and brands of benchtop CNC machines.
- No tools required for most set ups.
- Hold parts along the edges, leaving the top of the part free for machining.
- Secure parts from the top when working inside a larger blank.
- Compatible with the MicroJig MatchFit system.
- Edge Guides locate along your spoilboard to provide an accurate, low-profile origin point for easy setups, especially when repeating programs. They can also be aligned within any MatchFit Dovetail Groove.
- Ring Clamps can be placed anywhere along your work table to lock and unlock your parts with just a twist of the wrist. Ring Clamps feature a unique fixed hub to eliminate loosening when in use.
- Ramp Clamps use ramps to hold parts applying force in and down to prevent movement and lifting. They feature a clamping edge that moves forward and down along a ramp to provide clamping force in two directions
- U-Pads clamps apply pressure on the top and sides at the same time, preventing both lifting and sliding. U-Pad Clamps provide superior hold for stock up to 1-1/8” (28 mm) thick.
You may also like
Dovetail Clamp AP from the Matchfit series - with anti-pivot technology and X-PAD High quality | practical | versatile
Item no.: MJ-DVC-850APDelivery in 1-2 business days
One-hand quick-release clamp | Anti-slip pad | MatchFit system
Item no.: MJ-DVC-625QCK2Delivery in 1-2 business days
Dovetail Clamp AP from the Matchfit series - with anti-pivot technology and X-PAD High quality | practical | versatile
Item no.: MJ-DVC-538K2Delivery in 1-2 business days
Rail clamps for fixtures, assembly and more. consisting of dovetail clamps, setting gauge, dovetail cutter & track screws
Item no.: MJ-DVC-1177K2Delivery in 1-2 business days
8 piece pack | for clamping for a wide range of fixtures
Item no.: MJ-DV-HK4-5K2-VPDelivery in 1-2 business days
Dovetail Ratchet Clamp from the Matchfit series | High-quality workmanship | Practical one-handed | Versatile use
Item no.: MJ-DVC-700RAPDelivery in 1-2 business days
Clever self-folding stop riders | Universal | MatchFit system
Item no.: MJ-DVPS-1K6Delivery in 1-2 business days
6x screw and wing nut - endless possibilities! Stably constructed | Durably materialised | Practically thought-out
Item no.: MJ-DV-HL1-5K6Delivery in 1-2 business days
6x screw and wing nut - endless possibilities! | Stably constructed | Durably materialised | Practically thought-out
Item no.: MJ-DV-HL1-0K6Delivery in 1-2 business days
6x slot nut and screw - endless possibilities! | Stably constructed | Durably materialised | Practically thought-out
Item no.: MJ-DV-HL0-0K6Delivery in 1-2 business days
Compatible accessories
Shank: 8 mm | D: 12,7 mm | NL: 9,53 mm | Angle: 14° MATCHFIT System
Item no.: MJ-MB-8MM-0514Delivery in 1-2 business days
Shank: 12 mm | D: 12,7 mm | NL: 9,53 mm | Angle: 14° MATCHFIT System
Item no.: MJ-MB-12MM-0514Delivery in 1-2 business days