Milescraft BenchLock
Delivery in 1-2 business days
€9.90
% €15.46 (35.96% saved)
- 1x threaded rod
- 1x base plate
- 1x Distance and alignment gauge
- 1x turning handle
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a.Ammersee Germany
[email protected]
https://www.sautershop.de
BENCHLOCK FROM MILESCRAFT
Attachment & stop for workbench clamps.
"BenchLock makes it easy to have the clamping force where you need it most. Create a versatile clamping station on your workbench with tool-free installation. Simply attach your BenchClamp to the clamp base, insert the bar through the desired hole, tighten the locking knob and you're ready to go.
Assembling the "BenchLock":
- First remove the screw that is screwed into your workbench clamp. Insert the shorter end of the threaded rod from below through the opening in the base plate and screw the shorter thread into the workbench clamp. The base plate and threaded rod are now firmly connected.
- Now insert the threaded rod into the hole and screw the turning handle firmly onto the protruding thread by hand from below.
Note: To remove the "BenchLock", proceed in reverse order. The V-groove in the base plate must face the workpiece to be clamped. The base plate together with the clamp can be rotated through 360°.
Technical data
-
For clamping widths
38 mm, 50 mm, 63 mm and 76 mm
-
For hole diameters
19.05 mm, 19 mm or 20 mm
- Compatible with the Milescraft FaceClamp 76 mm
-
Max. Workbench thickness
50 mm
Features & benefits
- The "BenchLock" can be mounted on any work surface with a minimum thickness of 19 mm. It fits into any workbench with 19 mm or 20 mm bench hook holes.
- If you want to drill (additional) holes, use a 20 mm drill bit.
- The base plate of the "BenchLock" has straight sides so that straight workpieces can be positioned. The V-groove on the front edge is for non-slip positioning of corners.
- For use with the Automaxx 76 mm and Automaxx 152 mm workpiece clamps.
You may also like
adjusts automatically to the thickness of the workpiece | Projection: 152 mm
Item no.: KR-KBC6Delivery in 1-2 business days
Automatic workbench clamp | Kreg KBC-3 | span width: 76 mm
Item no.: KR-KBC3Delivery in 1-2 business days
Compatible accessories
adjusts automatically to the thickness of the workpiece | Projection: 152 mm
Item no.: KR-KBC6Delivery in 1-2 business days
Automatic workbench clamp | Kreg KBC-3 | span width: 76 mm
Item no.: KR-KBC3Delivery in 1-2 business days