Pivoting Router Lift OFL3.0K - Red Edition
Delivery in 1-2 business days
€709.49
- 1x Pivoting Router Lift OFL3.0
- 2x reduction plates long hole 16 and 32
- 1x reducing plate 68 mm
- 1x hexagon screwdriver 5x150 mm
- 4x fixing screws M6x50, washers and nuts
- 8x levelling screws M5x8
- 1x instruction manual English
Optional accessories:
- Mounting kit: 20-piece mounting kit with 4x corner plates, 4x countersunk screws and 12x wood screws (Item No. SA-99600005)
- Levelling frame: Sheet steel frame for plate levelling (Art.No. SA-99600006)
- Digital measuring instrument: Digital height measuring instrument for 1/1000mm accurate Routing Depth adjustment (Part No. WX-WR525)
- Fence with protective shield: Arched or free routing kit for routing without rip fence (Art. No. SA-RTS-KIT)
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a. Ammersee Germany
[email protected]
https://www.sautershop.de
Pivoting Router Lift OFL3.0 for your Router Table - Red Edition Why this router lift? Simple operation of the router lift
For all those who already use a Kreg inlay plate and want to change to an OFL!
The first and only one of its kind - pivoting lift from -5° to 50°
The OFL3.0 for milling motors with 43 mm clamping neck including swivel mechanism as only professional tables have been able to do. Massive and well manufactured. Ideal for small workshops or due to low set-up and configuration times also ideal next to the large bench milling machine - Really Made in Germany!
Limited Editoin in Red. The perfect combination with the Harvey Router Table Top or the Woodpeckers super fence
- Pivots from -5° to 50°
- Classic snap-in points Classic snap-in points 0° | 15° | 22.5° | 30° | 45° | 90°
- No loss of routing depth!
- Easiest bit changes thanks to upward looking spindle and collet chuck!
- Innumerable routing possibilities - grooves, rebates, chamfers, mitre cuts, etc. - all with only 1 Slot Routing Cutter!
- Height adjustment via rotary handle above.
- Angle locking via a lever below.
- Centering in the slotted hole by means of two levers also below.
Technical data
-
Dimension insert plate
298 x 235 x 9 mm
-
Corner radius Insert plate
19.05 mm (3/4")
-
Height adjustment per rotation
4 mm
-
Max. Adjustment travel
74 mm
-
Height router lift (max. extended)
240mm
-
Max. Router bit diameter
55 mm
-
Weight
approx. 5 kg
Features & benefits
- Quality from Germany
Solid construction of high quality aluminium and steel. - Fine height adjustment to 1/10mm
Extreamle precise fine height adjustment, with exact scaling an effective spindle lock, conveniently operated via Allen screw. - Smooth-running columns
Enable a stepless and exact fine height adjustment. - Compatible to common router motors
The OFL3.0 is compatible with a wide range of commercially available motors with 43 mm Euro-neck. All models can be found below. - The magnetic reduction plates offer more choice and control in choosing the right hole size. Perfectly adapted to the size of the router cutter - especially for small workpieces,"snagging and getting stuck" on the edge of the hole eliminated!
- Routing also without rip fence
2 drill holes for the fence pin allow you to free rout round workpieces without rip fence. - Absolutely flat
Easy levelling of the OFL3.0K by levelling screws in the insert plate. Optionally a frame for a permanent level adjustment can be purchased. - No drilling necessary
Mounting holes (countersunk) for quick installation are already pre-drilled. - Lasered scaling
Millimeter scaling on the surface for exact alignment of the rip fence. - Recommended accessory: Dustshield extraction hood: For mounting on the underside of the OFL3.0K-RED for efficient extraction underneath the milling table. Also fits in combination with the cast iron milling table plate from Harvey.
Directly compatible and approved router motors:
- AMB (Kress): 530 FM, 800 FME, 1050 FME
- MAFELL: FM 800, FM 1000
- SUHNER: UAC 30 RF, UAD 25 RF, UAK 30 RF, UAK 30 RF SPZ12
- If your motor is not listed, please check the tolerances of the clamping neck of your model as specified by the manufacturer or contact us.
- MAFELL FM1650PV-LO not compatable
You may also like
Limited edition in RED | Unique and dust-free | With exact height fine adjustment & magn. reducing plates | for router motors with Ø 43mm clamping neck
Item no.: SA-FML-BR-K-REDDelivery in 1-2 business days
Demonstration model | Fully functional | Limited RED edition in KREG format | swivelling from -5° to 50° | for motors with Ø 43 clamping neck | height fine adjustment & magnetic reducing plates
Item no.: II-SA-OFL3.0K-REDReplenishment is on the way
A router fence without equal | Play-free adjustment guarantees absolute precision
Item no.: HAR-800738Delivery in 1-2 business days
Compatible accessories
for levelling of mounting plates and OFLs in Kreg format | especially with softer table top material
Item no.: SA-99600024Delivery in 1-2 business days
Perfect accessory for all sauter OFL and ELP | Safely keeps fingers protected
Item no.: SA-RTS-KITDelivery in 1-2 business days
For fixing and insert boards in KREG format | of MDF | for insert boards with dimensions 298 x 235 mm
Item no.: SA-ELP-FS-KDelivery in 1-2 business days
for the installation of mounting plates and OFLs | 20-piece set made of high-quality aluminium
Item no.: SA-99600005Delivery in 1-2 business days
For the pivoting sauter router lift OFL3.0 | Oblong holes: 12 | 22 | 42 | 54 | 68 + round hole: Ø 32 mm
Item no.: SA-RP3.0-SET-ALLDelivery in 1-2 business days
Under-table extraction for the swivelling router lift | Minimalist | Effective
Item no.: HE-DS1Delivery in 1-2 business days