Precision fence Vario-Bench for multifunctional tables
Delivery in 1-2 business days
€97.39
- 1x precision fence
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a. Ammersee Germany
[email protected]
https://www.sautershop.de
Precision fence for the Vario-Bench and other multifunction tables.
Extra long workpiece stop for stable support and perfect alignment of workpieces relative to the guide rail.
The flattened side allows workpieces to be supported even below the guide rail (from 8 mm material thickness) - thus particularly helpful for smaller workpieces.
Technical data
-
Size
900 x 40 x 11.8 / 7.8 mm
-
Material
anodised aluminium
Features & benefits
- Hole pattern compatible with the 0° to 4° holes of the large Vario-Bench plate (1200 x 800 mm).
- Compatible with all Ø 20 mm hole pattern / multifunction tables with 100 mm or 96 mm (e.g. Festool) hole spacing in 0°, 45° and 90° angles
- The continuous stop is an advantage, especially for shorter workpieces that cannot be attached to two bench dogs.
- Due to the elongated holes, the stop also fits with non-exact hole spacing of 96 mm or 100 mm
- Flattened at one end to easily process thin material up to 8 mm
- In combination with the stops (SA-VB-RIDER), the repeatable machining of several workpieces (e.g. formatting to the same size) is made much easier
- Perfectly matched to the diameters of the Vario-Bench bench dogs
- The fence can also be used for precise alignment of tools at squares to a workpiece edge, e.g. for flat dowel milling in the surface of the workpiece (for workpieces up to 60 cm wide)
- Compatible with the low-profile bench dogs (SA-VB-BDOG-LOW) - the stop rider then does not touch the workpiece
- Made in Germany
Compatible accessories
Set of stainless steel bench dogs incl. screw handles | Ø- 20 mm | length: 98 mm | magnetic
Item no.: SA-VB-BDOG-LDelivery in 1-2 business days
2 Long + 2 Short Magnetic Stainless Steel Dogs | 2 Neodymium magnets to fit Festool, Makita and Triton Rails
Item no.: SET-VB-BDOG-MAGDelivery in 1-2 business days
Magnetic bench dogs with low profile | perfect for surface finishing | 3 pieces | Ø 20 mm
Item no.: SA-VB-BDOG-LOWDelivery in 1-2 business days
Smoothly and ergonomically glide over the Vario-Bench precision fence | Stop for perfect alignment of the workpiece on the multifunction table .
Item no.: SA-VB-RIDERDelivery in 1-2 business days
Set of stainless steel bench dogs incl. screw handles | Ø 20 mm | length: 67 & 98 mm | magnetic
Item no.: SA-VB-BDOG-X4Delivery in 1-2 business days
to be attached to the sauter magnetic bench dogs | Compatable with Festool, Makita & Triton guide rails
Item no.: SA-VB-MAG-KITDelivery in 1-2 business days
Great alternatives
Stable workpieces and repeatable work | for the Vario-Bench as well as universal for multifunction tables with Ø 20 mm grid .
Item no.: SET-VB-FENCE-KITDelivery in 1-2 business days
You may also like
Simple and universal | 1 pair | for multifunctional tables with hole grid Ø 20 mm | For MFT 3 and Mobile Workshop MW 1000 and for SYS-MFT
Item no.: F-488030Delivery in 1-2 business days
the patented heart of the Vario-Bench system | Dimensions: 1200 x 800 mm | CNC milled | Made in Germany
Item no.: SA-VB-PLATE1.0Delivery in 1-2 business days
2 Piece Clamp Set | For use on multifunction tables such as Festool MFT
Item no.: BE-WNS-SET-MFTDelivery in 1-2 business days
Length: 1400 mm | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: F-491498Delivery in 2-3 business days
For using on multifunction tables such as Festool MFT | Hole diameter of 20 mm and plate thickness of min. 19 mm
Item no.: BE-BH-MFTDelivery in 1-2 business days
the perfect set for the start with the Vario-Bench | consisting of: MDF worktop incl. 4 magnetic bench dogs (2 pairs) | suitable for the Festool guide rail system
Item no.: SET-VB-STARTERDelivery in 1-2 business days
With adhesive pads for working on the wall | Length: 1400mm | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: F-577043Delivery in 1-2 business days
Router Sled | Centering laser | Side laser | Clamping set | Wall mount | Hose guard | Extraction adapter | Lifting Table | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: SET-SM-ALLDelivery in 1-2 business days
the complete set with perforated plate, base frame and 4x bench dogs | Dimensions perforated plate: 1200 x 800 mm | very variable, intelligent and patented
Item no.: SET-VB-ALLDelivery in 1-2 business days