RUWI pull-out perforated shelf with drawer
Delivery in 1-2 business days
€1,066.24
- 1x RUWI pull-out perforated worktop with drawer
RUWI GmbH
Alte Kirchstr. 1 78737 Fluorn-Winzeln Germany
[email protected]
https://ruwi.de/
RUWI pull-out perforated worktop with drawer
The worktop consists of a low-distortion multi-layer board which is covered on both sides with an extremely hard-wearing HPL layer. The holes are precisely milled in a 96 mm grid. The hole diameter of 20 mm makes the table compatible for a wide range of accessories. To enlarge the work surface, the two front sides can be flexibly pushed outwards by up to 30cm each and fixed in any position. Clamps can be inserted into the side profiles to clamp vertical workpieces. The generous storage space with the wide pull-out drawer means that all the necessary accessories, tools and support rails are always to hand. The table top is compatible with the RUWI lifting table and many other base frames.
Technical data
-
Table size
160 x 80 cm / 220 x 80 extended
-
Work surface material
Multiplex HPL coated
- Lateral profile for workpiece fixation
-
Clamping system
Hole grid with ø20mm
-
Weight
34 kg
Features & benefits
- Worktop 160 x 80 cm, extended 220 x 80 cm
- Perforated panel made of multiplex with very hard-wearing HPL coating on both sides
- 2 perforated panel sections at the ends that can be extended continuously
- 128 holes with a hole diameter of 20 mm, bevelled
- Profiles on the long sides for the possibility of workpiece fixation
- Storage space with drawer under the work surface for rails and accessories
You may also like
Height-adjustable | high load capacity | mobile | storage space | extendable Table size: 1600 x 800 / 2200 x 800 mm extended | Hole-Ø: 20 mm At present shipping is only possible to the EU, Switzerland and Norway
Item no.: SET-RU-21015Delivery in 1-2 business days
Compatible accessories
Can be fixed with clamping lever | Incl. millimetre scale on the side | Clamping bolt for Ø 20 mm hole systems
Item no.: RU-27186Delivery in 1-2 business days
Can be fixed with Allen key | Incl. millimetre scale on the side | Clamping bolt for Ø 20 mm hole systems
Item no.: RU-27185Delivery in 1-2 business days
Lifting table base frame - Frame dimensions: 1100 x 640 mm At present shipping is only possible to the EU, Switzerland and Norway
Item no.: RU-21001Delivery in 1-2 business days