Two Cherries chisel set in suede leather case, 8 pieces
Delivery in 1-2 business days
€199.90
% €205.50 (2.73% saved)
- 1x KIRSCHEN Two Cherries chisel set with hornbeam handles in suede leather case, 8 pieces
KIRSCHEN Werkzeuge
Wilh. Schmitt & Comp. GmbH & Co. KG Königstr. 59 42857 Remscheid Germany
[email protected]
KIRSCHEN Werkzeuge
Wilh. Schmitt & Comp. GmbH & Co. KG Königstr. 59 42857 Remscheid Germany
[email protected]
https://kirschen.de/de/Startseite.html
Two Cherries chisel set with hornbeam handles in suede leather case, 8-piece
Complete chisel set with cutting edge widths of 4 | 6 | 10 | 12 | 16 | 20 | 26 | 30 mm
Technical data
- Blades made from special tool steel (+/- HRc 61)
- Handles made of hornbeam, oiled
-
Cutting edge angle
25°
-
Cutting edge width
4 | 6 | 10 | 12 | 16 | 20 | 26 | 30 mm
- Sides bevelled
- Rolling bag made from genuine leather
Features & benefits
- Forged by hand for an improved material structure .
- Only high-carbon steels are used for the blades.
- Heat-treated in a salt bath for a hardness of approx. 61 Rockwell.
- Hardened over the entire usable length of the blade.
- Polished, groove-free surface for smooth cutting and easy plunging.
- Blade with side bevels to facilitate work close to the edge.
- For a razor-sharp finish, the cutting edge should be honed before first use. Blades should be wiped with an oil cloth after use to prevent corrosion.
- The hornbeam handle is flattened to prevent the tool from rolling off the table. The clamps on the striking knobs guarantee long enjoyment of the chisels.
- The wooden handle comes with an oil finish for a pleasant feel (not varnished!).
- Cutting angle of 25° and therefore ideal for soft to medium-hard woods.
- For hard woods, we recommend grinding a cutting edge angle of 28 - 30°.
- Practical suede leather bag for safe storage of the chisels
Similar products
Light chisels with hornbeam handle | KIRSCHEN- Made in Germany | special tool steel | 25° cutting edge
Item no.: KI-1171002Delivery in 1-2 business days
Lightweight chisels with hornbeam handle | KIRSCHEN- Made in Germany | Special tool steel | 25° cutting edge
Item no.: KI-1151002Delivery in 1-2 business days
Compatible accessories
Length: 310 mm | head: 135 x 65 mm
Item no.: PI-52-2-PDelivery in 1-2 business days
Easy to use | Precise grinding angles
Item no.: MP-20117Delivery in 1-2 business days
Self-adhesive | Diamond-tipped | Practical | K1200
Item no.: MP-20131Delivery in 1-2 business days
The 6-stage sharpening station for perfect sharpening results
Item no.: MP-20165Delivery in 1-2 business days
Length: 310 mm | head: 155 x 65 mm
Item no.: PI-52-3-PDelivery in 1-2 business days
Length: 285 mm | head: 105 x 65 mm
Item no.: PI-52-1-PDelivery in 1-2 business days