Two Cherries chisel set in wooden box, 4 pieces
Lightweight chisels with hornbeam handle | KIRSCHEN- Made in Germany | Special tool steel | 25° cutting edge
Delivery from 22.04.2026
€92.43
Brand: KIRSCHEN
Item no.:
KI-1141000
Weight:
1.026 kg
- 1x KIRSCHEN Two Cherries chisel set in wooden case, 4 pieces
Manufacturer:
KIRSCHEN Werkzeuge
Wilh. Schmitt & Comp. GmbH & Co. KG Königstr. 59 42857 Remscheid Germany
[email protected]
KIRSCHEN Werkzeuge
Wilh. Schmitt & Comp. GmbH & Co. KG Königstr. 59 42857 Remscheid Germany
[email protected]
EU representative:
KIRSCHEN Werkzeuge
Wilh. Schmitt & Comp. GmbH & Co. KG Königstr. 59 42857 Remscheid Germany
[email protected]
https://kirschen.de/de/Startseite.html
KIRSCHEN Werkzeuge
Wilh. Schmitt & Comp. GmbH & Co. KG Königstr. 59 42857 Remscheid Germany
[email protected]
https://kirschen.de/de/Startseite.html
Two Cherries chisel set with hornbeam handles in wooden box, 4-piece
All-round chisel set with the four common cutting edge widths 10 | 16 | 20 | 26 mm
Technical data
- Blades made from special tool steel (+/- HRc 61)
- Handles made from oiled hornbeam
-
Cutting edge angle
25°
-
Cutting edge width
10 | 16 | 20 | 26 mm
- Sides bevelled
Features & benefits
- Forged by hand for improved material structure.
- Only high-carbon steels are used for the blades.
- Heat-treated in a salt bath for a hardness of approx. 61 Rockwell.
- Hardened over the entire usable length of the blade.
- Polished, groove-free surface for smooth cutting and easy plunging.
- Blade with side bevels to facilitate work close to the edge.
- For a razor-sharp finish, the cutting edge should be honed before first use. Blades should be wiped with an oil cloth after use to prevent corrosion.
- The hornbeam handle is flattened to prevent the tool from rolling off the table. The clamps on the striking knobs guarantee long enjoyment of the chisels.
- The wooden handle comes with an oil finish for a pleasant feel (not varnished!).
- Cutting angle of 25° and therefore ideal for soft to medium-hard woods.
- For hard woods, we recommend grinding a cutting edge angle of 28 - 30°.