Epoxy resin starter set 1.4 kg

Food-safe casting resin for layer thicknesses of up to 4 cm | Mixing cup incl. outer container and lid | Silicone brush | Stirring rods

Delivery time 2-3 days

72,39 €

65,00 €

incl. VAT / excl. shipping costs

Minimum pouring height: 1 mm
Maximum pouring height: 4 cm
Mixing ratio resin : hardener: 100 : 45
Processing temperature: 20 °C
Processing time at 20 °C: 60 - 90 min
Tack-free / next layer possible at 20 °C: 10 hrs
Demouldable after: 12 hours
Final strength: 7 days (After reaching final strength: intermediate sanding necessary for casting the next layer!)
Heat resistant up to: 60 °C
Content: 1.4 kg
Storage: dry, at 10-25 °C, without exposure to sunlight
Storage stability: approx. 6 - 9 months in sealed original container
Observe the manufacturer's processing instructions.

The resin and hardener set comes in the correct mixing ratio of 100:40 (it is best to weigh the resin and hardener with the scales).
Mixing cups, stirring rods and brushes are included in the starter set.
The epoxy resin is UV-resistant and is suitable, for example, for making scantlings for woodturning or snack and serving boards.
Suitable for colouring with a maximum of 10% colour paste, pigment or concentrate.
Temperature resistant up to 70 °C.
The silicone brush is reusable.
Important: Potting volume and layer thickness are interdependent. The thicker the layer, the smaller the mixing volume must be!
An ambient temperature above 20 °C can cause the mixture to boil and lead to boiling bubbles, stress cracks and discolouration!
For scantlings with a layer thickness of 1 mm - 4 cm, the maximum casting volume is 250 g.
For cutting boards with a layer thickness of 1 mm - 2.8 cm, the maximum casting volume is 2.8 kg for a layer thickness of 2.8 cm and 10 kg for a layer thickness of 1 cm.
Processing instructions: The objects to be embedded must be clean and free of dust, oil and grease. The moisture content of the wood must be below 13%.