Complete package for the perfect epoxy resin surface | random orbital sander | grit sizes 180 - 3000 | polish
Shipping within 24 hours (working days)
1.008,69 €
incl. VAT
Art.-Nr: MI-KIT2-723W-OMDE
4 Products
Technical Data
Minimum pouring height: 1 mm
Maximum pouring height: 1 cm
Mixing ratio resin : hardener: 100 : 55
Processing temperature: 20 °C
Processing time at 20 °C: 15 -20 min
Tack-free / next layer possible at 20 °C: 12 hours
Deformable after: 24 hours
Final strength: 7 days (After reaching final strength: intermediate sanding required for casting the next layer!)
Heat resistant up to: 70 °C
Content: 1.7 kg
Storage: dry, at 10-25 °C, without exposure to sunlight
Storage stability: approx. 6 - 9 months in the sealed original container
Properties & Advantages
The resin and hardener set comes in the correct mixing ratio of 100:55.
The epoxy resin is suitable, for example, as a cold glaze for jewellery or turned workpieces.
The viscous consistency means that even vertical surfaces can be sealed well.
Suitable for colouring with a maximum of 10% colour paste, pigment or concentrate.
Temperature-resistant up to 70 °C.
Important: Potting volume and layer thickness are interdependent. The thicker the layer, the smaller the mixing volume must be!
An ambient temperature above 20 °C can cause the mixture to boil and lead to boiling bubbles, stress cracks and discolouration!
Not suitable for layer thicknesses over 1 cm.Processing instructions: The objects to be embedded must be clean and free of dust, oil and grease. The moisture content of the wood must be below 13%.
