- Routing
- Router Bits
- 8 mm Router Bits
- Chamfering cutters
Chamfering cutters
A chamfer routing cutter is always used in woodworking when edges are to be beveled. The routing cutter is placed on the router and positioned against the edge of the workpiece. The The wooden edge is beveled at the respective angle.
The standard angle is 45 degrees. But we also offer other angles. The carbide-tipped routing tools are available in various diameters. As a rule, chamfer routing cutters are equipped with a Ball bearing (thrust ring).
Here you will find chamfer routing cutters in shank 12 mm.
Chamfer Routing Cutter 80°
Chamfer Routing Cutter HM with ball bearing | E: 80° l D: 20 mm l NL: 14 mm l GL: 46 mm l KL: 16 mmDelivery time 2-3 days
117,57 €
incl. VAT
Chamfer Routing Cutter 30° with thrust pin
E (A): 30° | D: 27 mm | NL: 14 mm | S:- 8 mmDelivery time 2-3 days
88,20 €
incl. VAT
Festool Chamfer cutter HW S8 D38,5/23/30°
Shank 8 mm | D: 38,5 mm | NL: 25,7 mm | GL: 64,5 mm | alpha: 30°Delivery time 2-3 days
93,28 €
incl. VAT
Festool Chamfer cutter HW S8 D25,7/25,7/15°
Shank 8 mm | D: 25,7 mm | NL: 25,7 mm | GL: 70 mm | alpha: 15°Delivery time 2-3 days
79,59 €
incl. VAT
Chamfer Routing Cutter 30°
Chamfer Routing Cutter HM with ball bearing | E: 30° l D: 27 mm l NL: 3.2 mm l GL: 44 mm l KL: 16 mmDelivery time 2-3 days
117,62 €
incl. VAT
Festool Chamfer cutter HW S8 D36/45°
Shank 8 mm | D: 36 mm | NL: 11,5 mm | GL: 53 mm | alpha: 45°Delivery time 2-3 days
74,23 €
incl. VAT
Chamfer Routing Cutter 45° with thrust pin
E (A): 45° | D: 25 mm | NL: 16 mm | S: 8 mmNot available at the moment
Bevel Trim Cutter 45° with Ball Bearing D:28,6 mm
E 45 ° | D 28,6 mm | NL 10,5 mm | S 6 mm | SL 32 mmDelivery time 2-3 days
57,55 €
incl. VAT
Festool Edge trimming chamfer cutter HW S8 D24/0° +45°
Shank 8 mm | D: 24 mm | NL: 11 mm | GL: 54 mm | alpha: 0/45°Delivery time 2-3 days
53,87 €
incl. VAT
Fase-Trimming Router Cutter with thrust bearing E 0°/45°, D1 19 mm
E: 0-°/45-° | D1: 19 mm | D2: 26 mm | B: 15 mm | L: 53 mmDelivery time 2-3 days
45,28 €
incl. VAT
Chamfer Routing Cutter HW Z=2 15°
A: 15° l D: 30 mm l NL1: 35 mm l GL: 75 mm l d: 12.7 mm l S: 12 mmDelivery time 2-3 days
149,70 €
incl. VAT
Bevel Trim Cutter with Ball Bearing E:15°
E 15 ° | D 17,2 mm | NL 9,5 mm | S 8 mm | SL 32 mmDelivery time 2-3 days
38,29 €
incl. VAT
Chamfer Routing Cutter without ball bearing D 25.4 mm
E: 30° | D: 25.4 mm | B: 10 mm | L: 38 mmDelivery time 2-3 days
26,57 €
incl. VAT
Chamfer Routing Cutter with ball bearing Z3, D 19 mm
E: 15° | D: 19 mm | B: 10 mm | L: 49 mmDelivery time 2-3 days
41,38 €
incl. VAT
Bevel Trim Cutter with Ball Bearing E:22.5°
E 22.5 ° | D 19,9 mm | NL 9,5 mm | S 8 mm | SL 32 mmDelivery time 2-3 days
39,33 €
incl. VAT
Bevel & Flush Cutter 30°
E 30 ° | D 12,7 mm | NL 12,7 mm | S 8 mm | SL 32 mmDelivery time 2-3 days
29,07 €
incl. VAT
Bevel Trim Cutter with Ball Bearing E:30°
E 30 ° | D 23 mm | NL 9,5 mm | S 8 mm | SL 32 mmDelivery time 2-3 days
39,33 €
incl. VAT
Chamfer Routing Cutter without ball bearing D 22.2 mm
E: 23°| D: 22.2 mm | B: 10 mm | L: 38 mmDelivery time 2-3 days
26,63 €
incl. VAT
Bevel Trim Cutter 45° with Ball Bearing D:28,6 mm
E 45 ° | D 28,6 mm | NL 9 mm | S 8 mm | SL 32 mmDelivery time 2-3 days
49,90 €
incl. VAT
Chamfer Bit D: 25mm R:8mm
Chamfer bit | D25 | H40.3 | h8 | A8Delivery time 2-3 days
38,08 €
incl. VAT
Chamfer Routing Cutter with ball bearing Z3, D 24 mm
E: 25° | D: 22 mm | B: 10 mm | L: 49 mmDelivery time 2-3 days
45,16 €
incl. VAT
Double-sided round/Chamfer Routing Cutter
R: 2.5 mm l D: 22 mm l NL: 11-22 mm l GL:85 mm l ProfessionalDelivery time 2-3 days
168,16 €
incl. VAT
Chamfer Routing Cutter 45° Z2 small version
E: 45° | D: 22 mm | d: 9.5 | NL1: 6.2 mm | NL2: 11 mmDelivery time 2-3 days
108,16 €
incl. VAT
Bevel & Flush Cutter 45°
E 45 ° | D 12,7 mm | NL 12,7 mm | S 8 mm | SL 32 mmDelivery time 2-3 days
29,07 €
incl. VAT