CNC Router Collets
Collets are the bit holder on a router motor.
Depending on the shaft diameter of the router cutter, a different collet with the respective clamping dimension for the shaft is required. For our CNC cutters there are collets from 3 mm to 10 mm or 1/4".
Depending on the model and manufacturer, the shape of the collet for the router may differ technically. Also the quality of the tool holders is often very different. In our online shop for routing tools we only carry collets of the original manufacturers and no simple replicas. Therefore the exact and safe fit of the cutters in the motor is always guaranteed.
Read more
Compatible with the Shaper SM1 spindle | Accepts speciality bits with 1/4” shanks (6,35 mm)
Item no.: ST-SC1-2500Delivery in 1-2 business days
Standard collets incl. union nut Ø 3.175 mm | for 1050 FME-1, 800 FME-Q, 800 FME, 530 FM
Item no.: AMB-98040102Delivery in 1-2 business days
Standard collets incl. union nut Ø 3 mm | for 1050 FME-1, 800 FME-Q, 800 FME, 530 FM
Item no.: AMB-98040101Delivery in 1-2 business days
Precision union nut for ER20 collets
Item no.: AMB-70318Delivery in 1-2 business days
ER20 Precision collet system Ø 12.7 mm | Clamping range 15,5 - 11,5 mm | without union nut
Item no.: AMB-70420Delivery in 1-2 business days
ER20 Precision collet system Ø12 mm | Clamping range 12 - 11 mm | without union nut
Item no.: AMB-70419Delivery in 1-2 business days
ER20 Precision collet system Ø 10 mm | Clamping range 10-9 mm | without union nut
Item no.: AMB-70418Delivery in 1-2 business days
ER20 Precision collet system Ø 8 mm | Clamping range 8 - 7 mm | without union nut
Item no.: AMB-70416Delivery in 1-2 business days
ER20 Precision collet system Ø 6,35 mm | Clamping range 6,5-5,5 mm | without union nut
Item no.: AMB-70415Delivery in 1-2 business days
ER20 Precision collet system Ø 6 mm | Clamping range 6-5 mm | without union nut
Item no.: AMB-70414Delivery in 1-2 business days
ER20 Precision collet system Ø 3,175 mm | Clamping range 3,5-2,5 mm | without union nut
Item no.: AMB-70411Delivery in 1-2 business days
ER20 Precision collet system Ø 3 mm | Clamping range 3-2 mm | without union nut
Item no.: AMB-70410Delivery in 1-2 business days
Care tips for collets and nuts
Industrial collets should be cleaned from time to time in a little solvent after use, re-protected against corrosion and never opened by force. Damaged collets should be replaced immediately, otherwise there is a risk of further damage and the router bit falling out.
In our shop you will find collets for almost all brands. So also for models from AMB, Mafell and many more.