Drill Stands
Use as a routing stand
Since the drill stand is equipped with a 43-mm fixture, it is not limited to use with drills. Other units that comply with the standard can also be used in this Euronorm clamping neck.
Above all, router motors can be used and turn the drill stand into a stationary router, which, thanks to the above-mentioned accessories, enable routing with unparalleled accuracy.
Read more
Position angle | with quick clamping system
Item no.: RU-27100Delivery in 1-2 business days
Vertical clamp with two quick release skewers | Accessories for the clamping plate
Item no.: RU-21129Delivery in 1-2 business days
Clamping and clamping elements | All clamping and clamping elements clearly arranged in one case
Item no.: RU-27750-1Delivery in 1-2 business days
Clamping and clamping elements | All clamping and clamping elements clearly arranged in one case
Item no.: RU-27770-4Delivery in 1-2 business days
Ø 30 mm | for 8mm profile rails
Item no.: RU-27565-1Delivery in 1-2 business days
Ø 20 mm | for 8mm profile rails
Item no.: RU-27562-4Delivery in 1-2 business days
for all motors and drills with Euro standard Ø 43 mm neck | for horizontal mounting of motor units
Item no.: WB-22312Delivery in 1-2 business days
Ø 20 mm | for 8mm profile rails | with thread for screwing in a component
Item no.: RU-27510-4Delivery in 1-2 business days
extremely stable and resilient | solid grey cast iron design | span width: 100 mm | jaw width: 100 mm | weight: 3,3 Kg
Item no.: WB-40527Delivery in 1-2 business days
8 mm groove, for all sauter profile rails
Item no.: RU-27650-4Delivery in 1-2 business days
extremely stable and resilient | solid grey cast iron design | span width: 125 mm | jaw width: 125 mm | weight: 3,5 Kg
Item no.: WB-40528Delivery in 1-2 business days
Clamping claws - set for coordinate table K400 | 10 pcs. for 10 mm T-slot width and M8 thread
Item no.: WB-24412Delivery in 1-2 business days
Ø 15 mm | for 6 mm profile rails
Item no.: RU-27550-1Delivery in 1-2 business days
Slot 6 mm | Ø 20mm with external thread
Item no.: RU-27500-1Delivery in 1-2 business days
Adapter bracket | Size: 60 x 60 x 50 mm
Item no.: RU-27144Delivery in 1-2 business days
Adapter plate open Laterally open; with M6 threaded hole
Item no.: RU-27155Delivery in 1-2 business days
Adapter bracket | Size: 60 x 30 x 60 mm
Item no.: RU-27102Delivery in 1-2 business days
Set of extension rails for clamping device | for drill rig rigid/pivot
Item no.: FA-140290100Delivery in 1-2 business days
More flexible than the pillar drill
Advantages of a drill stand compared to a pillar drill
A pillar drilling machine or column drilling machine is used as a stationary device to drill holes precisely and exactly perpendicular to the material surface. However, the construction method imposes certain restrictions on the possible applications. In addition, these stationary machines sometimes take up considerable space in the workshop. This is where the drill stand for the cordless screwdriver comes into its own - it saves space and is much more flexible.
The basic function of a pillar drill is also provided by the drill stand: Precise vertical drilling. Since a drilling machine is usually already available, the drill stand offers significant cost savings. By using accessories such as coordinate tables, stop rails, end stops, machine vices and clamping plates, vertical drilling can also be carried out even faster, safer and more accurately.
Drilling at an angle to the material surface is effortless with a pivoting drill stand. You do not have to build any elaborate auxiliary constructions or jigs to align the workpiece at an angle, as is necessary with the pillar drilling machine. The drill rig is a mobile tool: it can be used not only in the workshop, but also for interior work and on the construction site. Vertical as well as inclined drilling is thus always and everywhere possible. In addition, this mobility also enables drilling in the centre of large workpieces (e.g. wood-based panels), where pillar drilling machines quickly reach their limits due to the clearance widths.
Professional brands
Our drill stands come from respected manufacturers - Famag, Wabeco, Mafell - whose names stand for quality: innovative solutions, precise manufacturing, first-class workmanship and long service life.