Microjig MJ SPLITTER Thin Kerf Splitters
Delivery in 1-2 business days
€17.90
% €33.92 (47.23% saved)
- 2x Microjig MJ SPLITTER Thin Kerf Splitters
- 1x drill
- 1x drilling template
- Assembly screws
- English assembly instructions
Micro Jig, Inc.
1065E.SR 434, BOX 195607 32708 Winter Springs, FL USA
[email protected]
sauter GmbH
Arzbergerstraße 4 82211 Herrsching a.Ammersee Germany
[email protected]
https://www.sautershop.de/marke/MICROJIG
Microjig MJ SPLITTER Thin Kerf Splitters
Minimise the risk of kickback when working with your Zero Clearance Insert.
Technical data
-
Drilling template and riving knife material
Phenolic resin
-
Space requirement behind the blade with saw blade in uppermost position
at least 51 mm
- For cutting widths of 2.29 - 3 mm
Features & benefits
- The Microjig Splitters replace the riving knife on your saw when using zero clearance inserts.
- The precision drilling template supplied aligns exactly with the centre of the kerf, ensuring the perfect fit of the retrofit riving knife.
- To adapt the riving knife to the respective kerf, each side of a riving knife has an offset of 0.076mm.
- The special plastic compound provides the right combination of flexibility to prevent jamming and rigidity to prevent kickback.
- Requires a Zero-clearance insert with at least 50mm behind blade at highest point
- Note: Not applicable for mitre cuts!
You may also like
The original for mobile and stationary use. | Pull length: 217 mm | swivelling from -2 to 47° | saw blade Ø: 190 x 30 mm
Item no.: MAF-972101Delivery in 1-2 business days
Similar products
Avoid kickback on table saws Replaces the riving knife on zero-clearence inserts
Item no.: MJ-SP-2TKDelivery in 1-2 business days
Compatible accessories
2x replacement MJ SPLITTER Thin Kerf Splitters (Yellow)
Item no.: MJ-SP-Y-P3Delivery in 1-2 business days