DIY Router Tables
To plan of your own custom-made router table, you will need many components. The basic equipment includes a specially manufactured plate for mounting the router, routing stops, aluminium profile rails, pressure comb, insert plates or lifts, circuit breaker and other accessories. But the result is a router table with a very personal touch in your workshop.
Read more
Adapter bracket | Size: 60 x 60 x 50 mm
Delivery time 2 business days
Foldable workpiece stop | compatible with the PRS1015 routing fence from Kreg
In stock, delivery in 1-2 business days
Adapter bracket | Size: 60 x 30 x 60 mm
In stock, delivery in 1-2 business days
| Dimensions: 177 x 54 x 123 mm
In stock, delivery in 1-2 business days
For FS/2, FS/2-KP, FSK, MFT | 2 Pieces
In stock, delivery in 1-2 business days
T-slot clamping and guide rail | Length: 857 mm (33-3/4 inch)
In stock, delivery in 1-2 business days
Classic, high-quality cross cut fence | Extendable | Rasterised
In stock, delivery in 1-2 business days
Swing stop for Router Tables Compatable with Kreg rails
In stock, delivery in 1-2 business days
0-point central | white lacquered | 2 m
In stock, delivery in 1-2 business days
Fine adjustment 177 mm /- 144 mm | Fine adjustment up to 0.127 mm (0.005 inch) of the precision fence
In stock, delivery in 1-2 business days
Innovative, high-quality crosscut fence | Superfine detailed solutions
In stock, delivery in 1-2 business days
left to right | white painted | 1 m
In stock, delivery in 1-2 business days
Set of adapters, among others for Kreg, Trend & Woodpeckers | ID/AD 35/58 mm & ID/AD (step adapter) 33 - 48 mm/39- - 48 mm
In stock, delivery in 1-2 business days
Step adapter for suction hoses 54/48 and 39/33mm
In stock, delivery in 1-2 business days
Adapter for suction hose | Outer diameter (front): 58 mm | Inner diameter (rear): 35 mm
In stock, delivery in 1-2 business days
right to left | white painted | 1 m
In stock, delivery in 1-2 business days
For Kreg rip fence on sauter Router Table plate | Star grip and T-bolt screw M8 | 1 each
In stock, delivery in 1-2 business days
Spare plastic rings for insert plates and router lifts | suitable for: sauter ELP1.0 & OFL1.0, insert plates RTS1 & RTS2
In stock, delivery in 1-2 business days
Self adhesive tape measure | metric, 3.5 m, left-right
In stock, delivery in 1-2 business days
Self adhesive tape measure | metric, 3.5 m, right-left
In stock, delivery in 1-2 business days
Corner fixing set for insert panels | with 4 clips, screws and nuts each
In stock, delivery in 1-2 business days
Damaged original packaging | Fully functional | Parallel fence compatible with the DeWalt table saw | Aluminium fence jaws | Extraction port | T-slots for accessories
Replenishment is on the way
Everything for the DIY router table
Router table components
To realise the plan of your own custom-made router table, you need many components. The basic equipment includes a specially manufactured plate for mounting the router and routing stops, aluminium profile rails, pressure comb, insert plates, circuit breaker and other accessories.
But the result is a router table with a very personal touch in your workshop.
Router with router lift or router with insert plate
You have the option of equipping your self-built router table with either a router lift or an insert plate. We explain here when you use which and what the differences are:
Router motor in combination with router lift:
Router motors are used in stationary applications on router tables, in CNC routers or in drill/router stands.
- A router motor is limited to the essential functions and is therefore the optimal routing unit for work at the router table. A full-fledged router cannot use its many functions in stationary use and is therefore not necessary.
- The weight of the router motor is normally considerably less than that of a router. In addition to the housing, the router has other attachments, such as a plunge basket with columns, stops and fine height adjustment, which have no function on the router table.
- With the router motor, the cutter can be changed easily and conveniently from above. The spindle of the motor protrudes far enough above the table surface and is thus free for unrestricted access for the operating tool.
- Although a router motor has nominally less wattage, router motors with 1,000 to 1,800 watts are sufficient for common routing work.
- Router motors only work with router lifts when used in the router table (e.g. the swivelling router lift OFL3.0).
Router in combination with insert plate:
A router can be used together with an insert plate for stationary use on the router table.
A router offers many functions that a router motor does not. Examples are a fine height adjustment (if necessary from through the router table), a plunge basket with base plate for working with copying sleeves, a fence (hand-guided) or the integrated chip extraction.
For stationary use, we recommend a router with height adjustment fpossible through the router table (e.g. Trend T11 router or Triton routers).