DIY Router Tables
To plan of your own custom-made router table, you will need many components. The basic equipment includes a specially manufactured plate for mounting the router, routing stops, aluminium profile rails, pressure comb, insert plates or lifts, circuit breaker and other accessories. But the result is a router table with a very personal touch in your workshop.
Read more
Set with router table top, router table base and router fence | Fine levelling | Precise fit | Full-size router table
Item no.: SET-STARTER-7492Delivery in 1-2 business days
HPL 3.0 for router lifts and insert plates | Made of robust HPL coated plywood with sauter aluminium profile rails | Dimensions: 1200 x 800 x 28 mm
Item no.: SA-HPL2.0Delivery in 1-2 business days
suitable for sauter C-profile | thread: M6 x 25 mm | content: 10 pieces
Item no.: FO-HWE113Delivery in 1-2 business days
Wrapping sleeve | D1: 8 mm | D: 5.5 mm | L: 8 mm | d: M3 | 10 pcs.
Item no.: RA-TS-308X10Delivery in 1-2 business days
D: 8.5 mm | L: 20 mm | d: M4 | SW: 4 | 10 pcs.
Item no.: RA-SKDZ-420X10Delivery in 1-2 business days
for insert plates and sauter router lifts | made of MDF - suitable for panel size 306 x 229 mm
Item no.: SET-FS-11651Delivery in 1-2 business days
A real must-have for all Mafell Erika owners - the RUWI table extension | length: 104cm | width: 150mm | height: from 66 - 106cm
Item no.: RU-27139Delivery in 1-2 business days
Dimensions: 17 x 10 x 350 mm- anodized
Item no.: AF-350-ELOXDelivery in 1-2 business days
Wrapping sleeve | D: 13 mm | L: 5 mm | d: M3 | 10 pcs.
Item no.: RA-TSZ-305X10Delivery in 1-2 business days
Stop for T-rails | Fits on sauter C-profile rails | Ideal for round workpieces
Item no.: M-4034Delivery in 1-2 business days
D: 12 mm | L: 25 mm | d: M6 | SW: 6 | 4 pcs.
Item no.: RA-SKL-625X4CEDelivery in 1-2 business days
Safety switch (No voltage return) | Required for router table use | up to 3,000 W
Item no.: TRI-203P445Delivery in 1-2 business days
D: 8 mm | L: 12 mm | d: M4 | SW: 4 | 10 pcs
Item no.: RA-SKD30-412X10Delivery in 1-2 business days
Angle stop for use in combination with T-rails.
Item no.: M-4033Delivery in 1-2 business days
Length 77cm | Width 150mm | Height adjustment from approx. 66 - 106cm | Compatible with the Mafell Erika 70 / 85
Item no.: RU-27138Delivery in 1-2 business days
High-quality gauge for sauter profile rails Length of stop rail: 458 mm | including flip stop
Item no.: FO-MGC-10Delivery in 1-2 business days
2 Stops for the sauter FA-SA 2.0 fence | Intelligent flip stop | Screw-in stop pins | Can be folded away
Item no.: SA-FLIPSTOP-X2Delivery in 1-2 business days
Under table dust collection system | 100mm dust port | Door for easy access
Item no.: HAR-800739Delivery in 1-2 business days
For cast iron and steel tables | Infinitely variable speed adjustment
Item no.: SET-M3M-MAGNETDelivery in 1-2 business days
Fine adjustment | Precise results | compatible with sauter fence FA-SA2.0
Item no.: SA-FA-FEINDelivery in 1-2 business days
Fine adjustment | Precise results | compatible with sauter fence FA-SA2.0
Item no.: SET-FA-FEIN-X2Delivery in 1-2 business days
Suitable for all sauter router table tops FTP & HPL + 2 Flipstops | Aluminium jaws | Extraction connection Ø35mm | Stepless joining function
Item no.: SET-FA-SA20-FLIPSTOPDelivery in 1-2 business days
Router table top suitable for DeWalt circular table saw | Sturdy screen printed plate | Accurate fit
Item no.: SA-FT-DW-7294-20Delivery in 1-2 business days
Precise and customised | clean routing fence incl. 1 pair of fine adjustments | suitable for the FTP & HPL router table tops
Item no.: SET-FA-SA20-FEINDelivery in 1-2 business days
Everything for the DIY router table
Router table components
To realise the plan of your own custom-made router table, you need many components. The basic equipment includes a specially manufactured plate for mounting the router and routing stops, aluminium profile rails, pressure comb, insert plates, circuit breaker and other accessories.
But the result is a router table with a very personal touch in your workshop.
Router with router lift or router with insert plate
You have the option of equipping your self-built router table with either a router lift or an insert plate. We explain here when you use which and what the differences are:
Router motor in combination with router lift:
Router motors are used in stationary applications on router tables, in CNC routers or in drill/router stands.
- A router motor is limited to the essential functions and is therefore the optimal routing unit for work at the router table. A full-fledged router cannot use its many functions in stationary use and is therefore not necessary.
- The weight of the router motor is normally considerably less than that of a router. In addition to the housing, the router has other attachments, such as a plunge basket with columns, stops and fine height adjustment, which have no function on the router table.
- With the router motor, the cutter can be changed easily and conveniently from above. The spindle of the motor protrudes far enough above the table surface and is thus free for unrestricted access for the operating tool.
- Although a router motor has nominally less wattage, router motors with 1,000 to 1,800 watts are sufficient for common routing work.
- Router motors only work with router lifts when used in the router table (e.g. the swivelling router lift OFL3.0).
Router in combination with insert plate:
A router can be used together with an insert plate for stationary use on the router table.
A router offers many functions that a router motor does not. Examples are a fine height adjustment (if necessary from through the router table), a plunge basket with base plate for working with copying sleeves, a fence (hand-guided) or the integrated chip extraction.
For stationary use, we recommend a router with height adjustment fpossible through the router table (e.g. Trend T11 router or Triton routers).