DIY Router Tables
To plan of your own custom-made router table, you will need many components. The basic equipment includes a specially manufactured plate for mounting the router, routing stops, aluminium profile rails, pressure comb, insert plates or lifts, circuit breaker and other accessories. But the result is a router table with a very personal touch in your workshop.
Read more
Safe and firm guidance of the workpiece during Routing/ sawing.
Item no.: M-1406Delivery in 1-2 business days
Length 77cm | Width 150mm | Height adjustment from approx. 66 - 106cm | Compatible with the Mafell Erika 70 / 85
Item no.: RU-27134Delivery in 1-2 business days
Clamping width: 160 mm | For FS/2, FS/2-KP, FSK, MFT
Item no.: F-491594Delivery in 1-2 business days
Kreg reducer ring set 5 pcs. | for Router Tables PRS2100 & PRS1045 and insert plates PRS4034 & 4038
Item no.: KR-PRS3050Delivery in 1-2 business days
D: 16 mm | L: 40 mm | d: M8 | SW: 8 | 4 pcs
Item no.: RA-SKL-840X4Delivery in 1-2 business days
suitable for all variants of sauter Router Table FTP / HPL | Length: 710 to 770 mm
Item no.: FO-BSF5Delivery in 1-2 business days
Dimensions: 17 x 10 x 1200 mm- anodized | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: AF-1200-ELOXDelivery in 1-2 business days
Everything in place and always at hand for the Mafell Erika | Length: 77cm | Width: 150mm | Height: from 66 - 106cm | Compatible Mafell Erika
Item no.: RU-27133Delivery in 1-2 business days
For mounting the safety switch on router tables with LSD23 base frame | Delivery without safety switch
Item no.: SA-LSD-TRIPUS-KITDelivery in 1-2 business days
Mitre-angle fence for 3/4" guides | Self-adjusting guide | Extendable fence | Fine-adjustable rider
Item no.: W-SSMGDelivery in 1-2 business days
D: 12 mm | L: 18 mm | d: M6 | SW: 6 | 10 pcs
Item no.: RA-SK-618X10Delivery in 1-2 business days
D: 10 mm | L: 20 mm | d: M5 | slot | 10 pcs.
Item no.: RA-A-520X10Replenishment is on the way
Swivel castor with brake | D: 75 | H: 100 mm | M10 threaded screw
Item no.: MT-211120-0Delivery in 1-2 business days
D: 14 mm | L: 18 mm | d: M8 | SW: 8 | 10 pcs.
Item no.: RA-SK330-818X10Delivery in 1-2 business days
D: 12.3 mm | L: 16 mm | d: M6 | SW: 6 | 10 pcs.
Item no.: RA-SKDZ-616X10Delivery in 1-2 business days
Woodpecker's double profile | Length: 914 mm (36") | anodized aluminum
Item no.: W-DPTRACK36Replenishment is on the way
D: 12 mm | L: 15 mm | d: M6 | SW: 6 | 10 pcs
Item no.: RA-SKD30-615X10Delivery in 1-2 business days
Wrapping sleeve | D1: 15 mm | D: 10,5 mm | L: 12 mm | d: M8 | 10 pcs.
Item no.: RA-TS-812X10Delivery in 1-2 business days
Spacer sleeves for router table fences | 15 x 6.4 x 5 mm, PE plastic, black
Item no.: SET-15006405-4Delivery in 1-2 business days
Dimensions: 17 x 10 mm x 1200 mm | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: AW-17X10X1200Delivery in 1-2 business days
Replacement roller for IGM feed units AF32 | Ø = 80 mm | Width = 30 mm
Item no.: I-141-R80Delivery in 1-2 business days
4 Pieces | Compatable with the RUWI support rails and table extentions
Item no.: RU-21319Delivery in 1-2 business days
High-quality precision miter gauge from Kreg | with 610 mm long incl. swing stop
Item no.: KR-KMS7102Replenishment is on the way
Premium inlay plate made of aluminium - Made in Germany | pre-drilled for FESTOOL OF1400 & OF2200 | Dimensions: 306 x 229 x 9 mm
Item no.: SA-ELP2.0-FDelivery in 1-2 business days
Everything for the DIY router table
Router table components
To realise the plan of your own custom-made router table, you need many components. The basic equipment includes a specially manufactured plate for mounting the router and routing stops, aluminium profile rails, pressure comb, insert plates, circuit breaker and other accessories.
But the result is a router table with a very personal touch in your workshop.
Router with router lift or router with insert plate
You have the option of equipping your self-built router table with either a router lift or an insert plate. We explain here when you use which and what the differences are:
Router motor in combination with router lift:
Router motors are used in stationary applications on router tables, in CNC routers or in drill/router stands.
- A router motor is limited to the essential functions and is therefore the optimal routing unit for work at the router table. A full-fledged router cannot use its many functions in stationary use and is therefore not necessary.
- The weight of the router motor is normally considerably less than that of a router. In addition to the housing, the router has other attachments, such as a plunge basket with columns, stops and fine height adjustment, which have no function on the router table.
- With the router motor, the cutter can be changed easily and conveniently from above. The spindle of the motor protrudes far enough above the table surface and is thus free for unrestricted access for the operating tool.
- Although a router motor has nominally less wattage, router motors with 1,000 to 1,800 watts are sufficient for common routing work.
- Router motors only work with router lifts when used in the router table (e.g. the swivelling router lift OFL3.0).
Router in combination with insert plate:
A router can be used together with an insert plate for stationary use on the router table.
A router offers many functions that a router motor does not. Examples are a fine height adjustment (if necessary from through the router table), a plunge basket with base plate for working with copying sleeves, a fence (hand-guided) or the integrated chip extraction.
For stationary use, we recommend a router with height adjustment fpossible through the router table (e.g. Trend T11 router or Triton routers).