Rebate Cutters
This routing insert can be used to rout rebates, i.e. right-angled shouldering at the edge of the workpiece. Areas of application are e.g. frames, doors, panels or drawers made of soft and hard wood.
Rebate cutter with ball bearing
Since the rebate cutters are equipped with a ball bearing, you do not need an additional guide to guide the cutter cleanly and precisely along the edge. With a replaceable ball bearing, up to 6 different rebate depths can be achieved with just one cutter.
Read moreOD: 17 mm l ID: 6,35 mm l H: 5,56 mm
Item no.: T-B17Delivery in 1-2 business days
Spare ball bearing | ID: 4.76 mm (3/16") | W:- 12.7 mm (1/2") | C:- 4.76 mm (3/16")
Item no.: T-B127ADelivery in 1-2 business days
OD: 18 mm l ID: 6,35 mm l H: 5,56 mm
Item no.: T-B18Delivery in 1-2 business days
OD: 19.05 mm l ID: 4.76 mm l H: 4.76 mm
Item no.: T-B19ADelivery in 1-2 business days
OD: 19,05 mm l ID: 6,35 mm l H: 7,14 mm
Item no.: T-B19Delivery in 1-2 business days
OD: 20 mm l ID: 6,35 mm l H: 5,9 mm
Item no.: T-B20Delivery in 1-2 business days
OD: 21 mm l ID: 4,76 mm l H: 6 mm
Item no.: T-B21ADelivery in 1-2 business days
ID: 6,35 mm (1/4") | OD: 22 mm | H: 6 mm
Item no.: T-B22Replenishment is on the way
OD: 21 mm l ID: 6,35 mm l H: 5 mm
Item no.: T-B21Replenishment is on the way
OD: 22 mm l ID: 4,76 mm l H: 5 mm
Item no.: T-B22AReplenishment is on the way
OD: 23 mm l ID: 4,76 mm l H: 5 mm
Item no.: T-B23ADelivery in 1-2 business days
OD: 25 mm l ID: 4,76 mm l H: 5 mm
Item no.: T-B25ADelivery in 1-2 business days
OD: 30 mm l ID: 4,76 mm l H: 5 mm
Item no.: T-B300ADelivery in 1-2 business days
REBATE CUTTERS FOR THE MACHINING OF EDGES