Slot and Groove Cutters
For certain applications, disc grooving cutters are better suited than normal grooving cutters. These tasks include the grooving of narrow edges on components, but also the production of tongue-and-groove or slot-and-pin connections. If you often cut grooves of different widths, you will need cutters of different widths. You will find disc groove cutters and arbours from the renowned manufacturers ENT, Freud, Titman and Trend in our range.
Read more
D 40 mm | NL 2 mm
Item no.: E-13950Delivery in 1-2 business days
D 40 mm | NL 5 mm
Item no.: E-13953Delivery in 1-2 business days
D 40 mm | NL 4 mm
Item no.: E-13952Delivery in 1-2 business days
D 40 mm | NL 3 mm
Item no.: E-13951Delivery in 1-2 business days
D 40 mm | NL 6 mm
Item no.: E-13954Delivery in 1-2 business days
D 16 mm | GL 46.4 mm | S 12 mm | SL 20 mm
Item no.: E-13982Delivery in 1-2 business days
D 16 mm | GL 53.5 mm | S 8 mm | SL 32 mm
Item no.: E-14002Delivery in 1-2 business days
Slot cutter arbor | D7.94 | H60.3 | h0 | A8
Item no.: FR-60-12008PDelivery in 1-2 business days
Slot cutter arbor | D7.94 | H60.3 | h0 | A8
Item no.: FR-60-10008PDelivery in 1-2 business days
Mandrel for Disk Groove Cutter | GL: 62,5 mm | D: 6,35 mm | S: 8 mm
Item no.: T-33-60X8MMReplenishment is on the way
D 6,35 mm | NL 13 mm | S 8 mm | SL 34,5 mm | GL 68 mm
Item no.: E-14000Delivery in 1-2 business days
D 8 mm | NL 13 mm | S 8 mm | SL 34,5 mm | GL 68 mm
Item no.: E-14005Delivery in 1-2 business days
incl. 5 changeable grooving blades with NL 2-3-4-5-6 mm | arbor shank 8 mm | 4 ball bearings with Ø 22-26-28-30 mm
Item no.: E-09070Delivery in 1-2 business days
D 6,35 mm | NL 20 mm | S 8 mm | SL 34,5 mm | GL 68 mm
Item no.: E-13980Delivery in 1-2 business days
D 8 mm | NL 20 mm | S 8 mm | SL 34,5 mm | GL 68 mm
Item no.: E-13985Delivery in 1-2 business days
extra long Shankfor slotted discs | D: 8 mm | SL: 38 mm | GL: 87 mm | S: 8 mm
Item no.: T-33-31X8MMReplenishment is on the way
D 47,6 mm | NL 4 mm | S 8 mm
Item no.: E-13903Delivery in 1-2 business days
D 47,6 mm | NL 2 mm | S 8 mm
Item no.: E-13920Delivery in 1-2 business days
D 40 mm | NL 2 mm | S 6,35 mm
Item no.: E-13880Delivery in 1-2 business days
D 40 mm | NL 2,5 mm | S 6,35 mm
Item no.: E-13881Delivery in 1-2 business days
D 47,6 mm | NL 2,5 mm | S 8 mm
Item no.: E-13921Delivery in 1-2 business days
D 47,6 mm | NL 3 mm | S 8 mm
Item no.: E-13922Delivery in 1-2 business days
D 40 mm | NL 3 mm | S 6,35 mm
Item no.: E-13882Delivery in 1-2 business days
Advantages of disc grooving cutters compared to normal grooving cutters
Above a certain groove depth, normal grooving cutters are inferior to disc grooving cutters due to their design. For one thing, the chip ejection of a grooving cutter is not very good with deep grooves. You are forced to interrupt the work and remove the chips from the groove. Secondly, the cutting speed of the disc groover is many times higher because of the larger diameter, which leads to a much more precise routing result. (On the other hand, it is better to use normal grooving cutters when it comes to cutting wider grooves or grooves in the surface of a component).
Areas of application for disc grooving cutters
It is particularly advantageous to use several disc grooving cutters together on one arbor. In this way, the range of applications of the cutters is extended to include the problem-free and precise production of tongue-and-groove joints, whereby the tongue can be cut in one milling pass. Depending on the thickness of the material, the tenons for mortise-and-tenon joints can also be cut in this way.
If you often cut grooves of different widths, it makes sense to consider buying a t-slot cutter set. Different groove depths can be achieved by using ball bearings (thrust rings) with different diameters.
Note that using the disc groove cutters on the narrow edges of components is much easier and safer if they are used stationary on a router table instead of in a hand-held router.