Straight Cutters
Grooving cutters are among the most frequently used cutters in the group of wood cutters. Straight grooves can be used to decorate a surface and can be either parallel, diagonal, or milled into wood at the edges. Cable grooves or grooves in furniture construction are also a frequent area of application. The depth of the groove depends on the total length of the cutter. The routing cutter can also be used for Workpieces are cut off by routing through the wood. The following basic types are distinguished:
- Single-edged slot routing cutter Z1,
- double-edged slot routing cutter Z2,
- double-edged slot routing cutter Z2 with basic cutting edge.
D 22 mm | NL 20 mm | GL 60 mm | S 12 mm | SL 40 mm
Item no.: E-10566Delivery in 1-2 business days
D: 23 mm | NL: 20 mm | SL: 32 mm | GL: 52 mm | Professional
Item no.: TI-M2320-8Delivery in 1-2 business days
2-flute straight bit | D24 | H52 | h20 | A8
Item no.: FR-04-15808PDelivery in 1-2 business days
D 24 mm | NL 20 mm | GL 60 mm | S 12 mm | SL 40 mm
Item no.: E-10570Delivery in 1-2 business days
D 24 mm | NL 20 mm | GL 52 mm | S 8 mm | SL 32 mm
Item no.: E-10420Delivery in 1-2 business days
D: 24 mm l NL: 15 mm l SL: 54 mm l GL: 70 mm l Professional
Item no.: TI-M2415-70-8Delivery in 1-2 business days
D 24 mm | NL 20 mm | GL 52 mm | S 8 mm | SL 32 mm
Item no.: E-11008Delivery in 1-2 business days
D 25 mm | NL 30 mm | GL 70 mm | S 12 mm | SL 40 mm
Item no.: E-10573Delivery in 1-2 business days
D: 25 mm l NL: 15 mm l SL: 54 mm l GL: 70 mm Professional
Item no.: TI-M2515-70-8Delivery in 1-2 business days
D 25 mm | NL 20 mm | GL 52 mm | S 8 mm | SL 32 mm
Item no.: E-10421Delivery in 1-2 business days
D 25 mm | NL 20 mm | GL 52 mm | S 8 mm | SL 32 mm
Item no.: E-11009Delivery in 1-2 business days
D 25 mm | NL 30 mm | GL 62 mm | S 8 mm | SL 32 mm
Item no.: E-10423Delivery in 1-2 business days
D 25 mm | NL 20 mm | GL 60 mm | S 12 mm | SL 40 mm
Item no.: E-10571Delivery in 1-2 business days
2-flute straight bit | D25 | H56 | h19 | A8
Item no.: FR-04-15908PDelivery in 1-2 business days
D 26 mm | NL 20 mm | GL 60 mm | S 8 mm | SL 40 mm
Item no.: E-11013Delivery in 1-2 business days
D 28 mm | NL 20 mm | GL 52 mm | S 8 mm | SL 32 mm
Item no.: E-11019Delivery in 1-2 business days
D 4 mm | NL 12 mm | GL 57 mm | S 6 mm | SL 32 mm
Item no.: E-10204Delivery in 1-2 business days
D: 30 mm | B: 32 mm | L: 73 mm
Item no.: KLE-E101-300-RDelivery in 1-2 business days
D 30 mm | NL 20 mm | GL 52 mm | S 8 mm | SL 32 mm
Item no.: E-11020Delivery in 1-2 business days
D: 30 mm | NL: 15 mm | SL: 54 mm | GL: 70 mm | Professional
Item no.: TI-M3015-70-8Delivery in 1-2 business days
D: 40 mm | B: 32 mm | L: 73 mm
Item no.: KLE-E101-400-RDelivery in 1-2 business days
D 5 mm | NL 12 mm | GL 48 mm | S 6 mm | SL 32 mm
Item no.: E-10206Delivery in 1-2 business days
D 5 mm | NL 16 mm | GL 52 mm | S 6 mm | SL 32 mm
Item no.: E-10207Delivery in 1-2 business days
D 5 mm | NL 20 mm | GL 65 mm | S 6 mm | SL 32 mm
Item no.: E-10208Delivery in 1-2 business days
As a rule, all grooving cutters are basic cutting cutters, which means that the cutter tip is ground and can therefore be easily immersed in the material. But there are also those that have a special basic cutting edge. The routing result then shows a very cleanly milled bottom of the groove. This is important when the groove is used as an ornament on a workpiece is attached. The optics becomes thereby clearly more beautiful.
Special types of slot routing cutters are the T-slot routing cutters and V-slot routing cutters. In our online shop we also offer indexable insert cutters for the production of groove forms. You will also find groove cutters in 12 mm shank.
If screwless wood joints are required, the slot routing cutter is used for routing finger tines. With the appropriate routing template, the Clean routing of recesses. You will find the matching templates and routing cutters in our routing machine category.