Cutters with Replaceable Blades
Routing cutters with reversible blades made of carbide are available in different types of cutters. Whether groove cutters, face cutters, flush router bits with ball bearings or rebate cutters: The router bits are available in many diameters and deliver high-quality results in craftsman quality. They can be used on hand routers and stationary routing machines. The reversible blade router bits are also ideal for drilling into hard and soft wood.
Read more
Easy tightning | precise torque | for TC knives and reversible blades in router bits and planer heads
Item no.: I-CTW-006Delivery in 1-2 business days
D 14 mm | NL 50 mm | S 12 mm | GL 94 mm
Item no.: E-20084Delivery in 1-2 business days
D 16 mm | NL 30 mm | S 12 mm | GL 82 mm
Item no.: E-20180Delivery in 1-2 business days
D 8 mm | NL 20 mm | S 12 mm | GL 63 mm
Item no.: E-20080Delivery in 1-2 business days
D:20 mm l NL: 30 mm l GL: 80 mm l S: 8 mm
Item no.: TI-M2030-8RTDelivery in 1-2 business days
Shank 8 mm | D: 8 mm | NL: 20 mm | GL: 50 mm
Item no.: F-491078Delivery in 1-2 business days
Reversable Blades | D: 19 mm l NL: 12 mm | GL: 45 mm | S: 8 mm
Item no.: I-F043-19181Delivery in 1-2 business days
D 18 mm | NL 30 mm | S 12 mm | GL 82 mm
Item no.: E-20181Delivery in 1-2 business days
Replaceable blades and bearing | E: 10° | D: 20 mm | NL: 14 mm | GL: 46 mm | KL: 16 mm
Item no.: TI-BGT90L-8RTDelivery in 1-2 business days
D 22 mm | NL 49,5 mm | GL 100 mm | S 12 mm | SL 40 mm
Item no.: E-20322Delivery in 1-2 business days
D 22 mm | NL 30 mm | S 12 mm | GL 74 mm
Item no.: E-20092Delivery in 1-2 business days
D: 30 mm l NL: 30 mm l GL: 82 mm l S: 12 mm
Item no.: TI-M3030-12RTDelivery in 1-2 business days
E 45 ° | D 29 mm | NL 12 mm | GL 60 mm | S 8 mm | SL 30 mm
Item no.: E-20293Delivery in 1-2 business days
D 19 mm | NL 30 mm | GL 72 mm | S 8 mm | SL 30 mm
Item no.: E-20291Delivery in 1-2 business days
D 16 mm | NL 30 mm | S 12 mm | GL 74 mm
Item no.: E-20086Delivery in 1-2 business days
WPL Slot Routing Cutter/ Reversable Blades-- , Z1Slot Routing CutterD: | 16 mm l NL: 50 mm l GL: 96 mm l S: 12 mm |
Item no.: I-F047-16521Delivery in 1-2 business days
E 30 ° | D 29 mm | NL 12 mm | GL 65 mm | ØKL 15,9 mm | S 8 mm | SL 32 mm
Item no.: E-20292Delivery in 1-2 business days
D 20 mm | NL 30 mm | S 12 mm | GL 74 mm
Item no.: E-20090Delivery in 1-2 business days
D 10 mm | NL 20 mm | S 12 mm | GL 63 mm
Item no.: E-20081Delivery in 1-2 business days
Shank 8 mm | D: 38 mm | NL: 12 mm | GL: 53.7 mm
Item no.: F-491085Delivery in 1-2 business days
Shank 8 mm | D: 10 mm | NL: 25 mm | GL: 55 mm
Item no.: F-491079Delivery in 1-2 business days
Shank 8 mm | D: 12 mm | NL: 30 mm | GL: 61 mm
Item no.: F-491080Delivery in 1-2 business days
D: 18 mm l NL: 30 mm l GL: 82 mm
Item no.: TI-M1830-8RTDelivery in 1-2 business days
for mod. edge router MFK 700 EQ/B-Plus | or any router fitted with a 8mm collet
Item no.: F-499811Delivery in 1-2 business days
what are the advantages of a router bit with reversible blade?
Thanks to its exchangeable reversible blades, an insert router impresses with a high degree of versatility and economy. If a blade is no longer suitable for routing, it can simply be turned, as most reversible blades have at least two cutting sides. When all the cutting edges have been worn down, the knife can be replaced at low cost. It is therefore no longer necessary to resharpen the entire router, there is no need to go to a sharpening service. The problem of dimensional differences that occur with conventional milling tools due to resharpening can also be avoided in this way. This means that a high degree of repeat accuracy is achieved during routing. Due to the constant diameter, the tool is always ready for use.
Even though the purchase price is initially higher than for conventional end mills, these routers are worthwhile, especially if the router is used frequently.
Note: For safety's sake, always check that the screws are tight before using insert cutters.