Straight Cutters
Grooving cutters are among the most frequently used cutters in the group of wood cutters. Straight grooves can be used to decorate a surface and can be either parallel, diagonal, or milled into wood at the edges. Cable grooves or grooves in furniture construction are also a frequent area of application. The depth of the groove depends on the total length of the cutter. The routing cutter can also be used for Workpieces are cut off by routing through the wood. The following basic types are distinguished:
- Single-edged slot routing cutter Z1,
- double-edged slot routing cutter Z2,
- double-edged slot routing cutter Z2 with basic cutting edge.
Shank 12 mm | D: 18 mm | NL: 45 mm | GL: 90 mm
Item no.: F-491092Delivery in 1-2 business days
Shank 12 mm | D: 20 mm | NL: 45 mm | GL: 90 mm
Item no.: F-491093Delivery in 1-2 business days
Shank 8 mm | D: 5 mm | NL: 12 mm | GL: 50 mm
Item no.: F-490943Delivery in 1-2 business days
Shank 8 mm | D: 11 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490961Delivery in 1-2 business days
Shank 8 mm | D: 14 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490964Delivery in 1-2 business days
Shank 12 mm | D: 14 mm | NL: 40 mm | GL: 85 mm
Item no.: F-491088Delivery in 1-2 business days
Shank 8 mm | D: 12 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490962Delivery in 1-2 business days
Shank 8 mm | D: 15 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490965Delivery in 1-2 business days
Shank 8 mm | D: 3 mm | NL: 6 mm | GL: 45 mm
Item no.: F-490952Delivery in 1-2 business days
Shank 8 mm | D: 24 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490974Delivery in 1-2 business days
Shank 8 mm | D: 10 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490959Delivery in 1-2 business days
Shank 12 mm | D: 14 mm | NL: 50 mm | GL: 100 mm
Item no.: F-491089Delivery in 1-2 business days
Shank 8 mm | D: 20 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490971Delivery in 1-2 business days
Shank 8 mm | D: 18 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490968Delivery in 1-2 business days
Shank 8 mm | D: 22 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490973Delivery from 24.04.2026
Shank 8 mm | D: 9 mm | NL: 23 mm | GL: 55 mm
Item no.: F-490958Delivery in 1-2 business days
Shank 8 mm | D: 7 mm | NL: 17 mm | GL: 55 mm
Item no.: F-490956Delivery in 1-2 business days
Shank 8 mm | D: 25 mm | NL: 20 mm | GL: 60 mm
Item no.: F-490975Delivery from 23.04.2026
Shank 8 mm | D: 10 mm | NL: 30 mm | GL: 60 mm
Item no.: F-491648Delivery in 1-2 business days
Shank D8 | 6-piece slot milling cutter SET | D: 8; 10; 12; 16; 18; 20 mm
Item no.: FR-88-30508PDelivery in 1-2 business days
Shank 8 mm | D: 12 mm | NL: 30 mm | GL: 60 mm
Item no.: F-491649Delivery in 1-2 business days
Shank 12 mm | D: 16 mm | NL: 60 mm | GL: 100 mm
Item no.: F-491091Delivery in 1-2 business days
Shank 12 mm | D: 12 mm | NL: 40 mm | GL: 90 mm
Item no.: F-491087Delivery in 1-2 business days
Shank 8 mm | D: 8 mm | NL: 30 mm | GL: 60 mm
Item no.: F-491647Delivery in 1-2 business days
As a rule, all grooving cutters are basic cutting cutters, which means that the cutter tip is ground and can therefore be easily immersed in the material. But there are also those that have a special basic cutting edge. The routing result then shows a very cleanly milled bottom of the groove. This is important when the groove is used as an ornament on a workpiece is attached. The optics becomes thereby clearly more beautiful.
Special types of slot routing cutters are the T-slot routing cutters and V-slot routing cutters. In our online shop we also offer indexable insert cutters for the production of groove forms. You will also find groove cutters in 12 mm shank.
If screwless wood joints are required, the slot routing cutter is used for routing finger tines. With the appropriate routing template, the Clean routing of recesses. You will find the matching templates and routing cutters in our routing machine category.