IGM Dovetail Jig FD300
The FD300 tine routing machine is inexpensive and extremely versatile! Basic unit with enclosed routing template for half-covered dovetail tines (size 12.7 mm). Incl. matching copy sleeve. Pleaserouter cuttersorder these separately. The copy sleeves required here with an outside diameter of 60 mm are mounted directly onto the base plate of the router with the aid of two bores at 50 mm intervals. This applies to all TREND, Perles, ELU, DeWalt and some Metabo devices. For all other hand routers, an adapter plate is required to accommodate the copy sleeve.
Set for creating box and dovetail joints incl. 2x router bits, for working widths up to 305 mm
In stock, delivery in 1-2 business days
Premium- Set for creating box and dovetail joints | incl. 4x router bits, for working widths up to 305 mm
In stock, delivery in 1-2 business days
Optional template for a dovetail jig FD 300. | for material thickness 8-12 mm
In stock, delivery in 1-2 business days
Produce box and dovetail joints quickly Working width max. 305 mm
In stock, delivery in 1-2 business days
Finger Routing Cutter f. open finger tines, 12.7mm | TC (HM) for FD3130 & FD6130, and FD3190 & FD6190, with D 12.7 mm, 8 mm
In stock, delivery in 1-2 business days
Finger Routing Cutter f. open finger tines, 8mm | TC (HM) with Z2, with D 8 mm, Shank8 mm, for FD3080 and FD6080
In stock, delivery in 1-2 business days
Optional template for a dovetail jig FD 300 | For material thickness 8-12 mm
In stock, delivery in 1-2 business days
For holding guide bushes | 9 hole patterns for trim routers | Glass fibre reinforced | Precision centring
In stock, delivery in 1-2 business days
For holding guide bushes | 18 hole patterns | Glass fibre reinforced | Precision centring | Ø 180 mm
In stock, delivery in 1-2 business days
For holding guide bushes | 13 hole patterns for most small routers | Glass fibre reinforced | Precision centring
In stock, delivery in 1-2 business days
Optional template for a dovetail jig FD 300.| For material thickness 8-19 mm
In stock, delivery in 1-2 business days
Adapter plate for router copy rings | for all routersn, undrilled, transparent, D=170 mm, thickness 8 mm
In stock, delivery in 1-2 business days
Optional template for a dovetail jig FD 300.| For material thickness 8-22 mm
In stock, delivery in 1-2 business days
OD: 11.1 mm l ID: 9 mm l Sleeve 6 mm
In stock, delivery in 1-2 business days
Optional template for a dovetail jig FD 300. | For material thickness 16-25 mm
Available from 28.07.2026
E: 7° | D: 19,05 mm | NL: 25,4 mm | SL: 44,6 mm
In stock, delivery in 1-2 business days
E: 8° | D: 6 mm | NL: 6,8 mm | S: 8 mm
In stock, delivery in 1-2 business days
Unibase fixing pin 8mm /12mm | For 12 mm & 8 mm collets
Delivery time 15 business days
OD: 15.8 mm l ID: 14 mm l Sleeve 6 mm
Delivery time 15 business days
OD: 22 mm l ID: 19 mm l Sleeve 6 mm
In stock, delivery in 1-2 business days
A: 8° | D: 12.7 mm | SØ: 8 mm | NL: 20.45 mm | SL: 40 mm
In stock, delivery in 1-2 business days
Routing tines with a solid tine routing tool
Inexpensive tine routing machine
The FD300 tine routing machine is inexpensive and extremely versatile!
"A well-functioning routing machine that isn't expensive. Solidly manufactured and successfully tested in practice over many years. After a short test phase, easy and simple to operate - for precise and beautiful wood joints."
- Quote: Guido Henn fromHandbuch Oberfräse.
Basic unit with enclosed routing template for half-covered dovetail tines (size 12.7 mm). Incl. matching copy sleeve. Pleaserouter cuttersorder these separately.
Further templates for half-covered tines (size 6.35mm), open finger tines and tines open on both sides can also be supplied on request acquire.
The required copy sleeve is included in the scope of delivery of the individual stencils, unless it is already included in the basic unit. routing cutters must be ordered separately.
The copy sleeves required here with an outside diameter of 60mm are mounted directly onto the base plate of the router with the aid of two bores at 50mm intervals. This applies to all TREND, Perles and ELU models, many DeWalt models and some Metabo devices. For all other hand routers, an adapter plate is required to accommodate the copy sleeve.