Sawing
We offer semi-stationary circular table saws, mitre saws and underfloor pull saws from professional manufacturers. In addition, there are also electric jigsaws, hand-held circular saws and plunge saws at an equally high level of quality. For these machines we have a wide range of accessories, guide rails and MFT tables, but above all we offer an inexhaustible assortment of circular saw blades, including "Die Roten" from the manufacturer Freud. We also have a good selection of Japanese saws for the quick cut in between without major set-up and adjustment work.
Read more
500mm | Narrow Cut | Compatable with many Guide Rails
Item no.: BD-BD0305Delivery in 1-2 business days
Perfect Accuracy on MFT Tables | For the Benchdogs Fence
Item no.: BD-BD0038Delivery in 1-2 business days
Systainer SYS3 M 437 | Guide Rail FS 1400/2 | NOT FOR SALE OUTSIDE EUROPE
Item no.: SET-F-576115Delivery in 2-3 business days
Circular table saw ALPHA HW110SE-36 | COMPASS ST-1500 Sliding table | COMPASS RT-800 Stainless steel router table top | NOT FOR SALE OUTSIDE THE EU, SWITZERLAND AND NORWAY
Item no.: SET-HAR-804133Delivery in 4-5 business days
Universal use with hand and plunge-cut circular saws | 160 x 1.8/1.3 x 20, Z36 | FREE Pica pencil 0.9mm
Item no.: SET-FR06W004H-7070Delivery in 1-2 business days
One-hand quick-release clamp | Anti-slip pad | MatchFit system
Item no.: MJ-DVC-625QCK2Delivery in 1-2 business days
Pair of round eccentric clamps | Adjustable | Reliable | MatchFit system
Item no.: MJ-CN-P2K2Delivery in 1-2 business days
Ramp-clamp pair | Angled clamping | Edge & corner | MatchFit system
Item no.: MJ-CN-P3K2Delivery in 1-2 business days
330mm | Narrow Cut | For Festool, Makita, Kreg and other Guide Rails | Systainer
Item no.: BD-BD0311Delivery from 21.05.2026
For 20mm Ø Dog Holes | 40mm High
Item no.: BD-BD0142Delivery from 21.05.2026
Reliable problem solver with bar handle | Robust design | 4-stroke pendulum action | 18 V
Item no.: B-0-601-5B2-000Delivery in 1-2 business days
For the production of grooves with a straight base | 6.2 - 20 mm width
Item no.: I-C23031208MDelivery in 1-2 business days
Powerful & compact | Two-point extraction system | 70 x 312 cutting capacity | Practical one-hand transport handle
Item no.: B-0-601-B19-100Delivery in 1-2 business days
Guide rail for routers, plunge & hand-held circular saws | 1,600 mm | System 32 hole line | Extendable
Item no.: MAF-207601Delivery in 1-2 business days
Guide rail for routers, plunge & hand-held circular saws | 800 mm | System 32 hole line | Extendable
Item no.: MAF-207600Delivery in 1-2 business days
Compatable with the Erika 70 and Erika 85 Double clamping | fine adjustment | quick clamping system
Item no.: MAF-207506Delivery in 1-2 business days
For KS 60, KSC 60
Item no.: F-578569Delivery in 1-2 business days
Universal saw chain SC 3/8"-91 U-39E | Systainer SYS3 M 437 | FS 800/2 Guide rail | NOT FOR SALE OUTSIDE EUROPE
Item no.: SET-F-576565Delivery in 1-2 business days
Cutting performance and flexibility | Space-saving sliding arm | 104 x 341 cutting capacity | Tool-free blade change
Item no.: B-0-601-B43-000Delivery in 1-2 business days
1 pair of versatile hold-down clamps | Rock-solid | Self-adjusting | MatchFit system
Item no.: MJ-CN-P4K2Delivery in 1-2 business days
For Festool Guide Rails | 2 x 95mm + 2 x 40mm Dogs
Item no.: BD-BD0976Delivery in 1-2 business days
For wood & wood-based materials | Clean surface cuts | Material thickness up to 64 mm | Toothed length: 75 mm | Tooth pitch: 2.5 mm | 5 pieces
Item no.: MAF-093846Delivery in 1-2 business days
No tear-outs with Dados on the PCS | Pull-in protection | Exact
Item no.: SAW-TSI-DLD-IDelivery in 1-2 business days
Robust jigsaw with bar handle | Robust base plate | Constant speed | Craftsman case
Item no.: B-0-601-512-000Delivery in 1-2 business days
The Saw
Whether it's the simple hand saw, an electric saw or a table saw: saws are always used in woodworking, because they are among the most important tools of the woodworker. We offer you a wide range of different saws. In order to bring some order into this variety and to make it easier for you to find your way around, you will find information on the different types of saws and their use below.
Hand saw - always indispensable
Even if the workshop is very well equipped with power tools and machines, one will always have certain hand tools in stock and use them. One of these is the hand saw - usually there are even several different saws. They make work easier when it comes to quickly shortening a workpiece in between or performing similar tasks. Often, such a task is completed more quickly with the hand saw because the various set-up and adjustment times that are necessary with an electric saw or stationary saw are eliminated here.
On the other hand, there are also jobs that cannot be done with an electric saw or not as well as with a hand saw. Think, for example, of cutting dovetails, even if appropriate dovetail jigscan be used for this purpose, or sawing dowels flush without damaging the surrounding wood surface.
Japanese saws offer a number of advantages over conventional European saws, such as tenon saws, back saws, foxtails:
- high cutting quality
- thin saw kerf
- long service life
We offer a range of the most common Japanese saws, as well as pruning saws of Japanese design.
Electric saws - save time and effort
When it comes to sawing different materials efficiently, precisely and quickly, there are a number of different electric saws to choose from. They offer different advantages and disadvantages depending on the work at hand, which you should take into account and weigh up against each other when deciding what to buy.
Hand-held circular saw
The hand-held circular saw - especially in combination with a guide rail or a saw table like our Vario-Bench - is also suitable for many tasks that you would otherwise carry out with a table saw or other large stationary machines, e.g. a sliding table saw or panel saw. Compared to these, however, it has the advantage of greater mobility, so that it can also be used whenever fast or rough cutting of various materials is required in the workshop or elsewhere. We offer corded and battery-powered circular saws from the manufacturers Festool, Mafell and Trend with the respective accessories.
Plunge saws
The plunge saw is similar to the hand-held circular saw in many respects. The main difference is that it does not have to cut into the material from one edge of the workpiece, but can be used at any point. This makes it easy, for example, to cut recesses in the centre of panels - think of the recesses for hobs and the like in kitchen worktops. However, the different design of the plunge saw also offers other advantages. For example, the extraction of sawdust is more efficient, it is easier to use with a guide rail or saw table, and it is easier to put the plunge-cut saw down than with a hand-held circular saw. We offer plunge-cut circular saws from leading manufacturers Bosch, Festool, Mafell, Makita and Triton, including cordless plunge-cut saws.
Jigsaws
The jigsaw comes into its own when you need to make small cuts in the middle of a workpiece for which a plunge saw is too large. For cuts inside the workpiece, you will usually drill a hole into which the saw blade is inserted. However, with pendulum jigsaws you can also make plunge cuts without a hole. Pendulum jigsaws also offer other advantages: better chip ejection and higher sawing power.
As with the other electric saws, we offer not only suitable accessories for the jigsaws from our manufacturers Bosch, Festool, Mafell and Triton, but also a large selection of jigsaw blades for different materials. Of course, these saw blades can also be used for jigsaws from other manufacturers.
Stationary saws
In addition to the large stationary saws, such as sliding table saws, panel saws, table saws and band saws, you will find a number of smaller stationary saws in the professional woodworking shop. They are also frequently used by private users, either as a supplement to the large machines, as is the case with the professionals, or in some cases instead of them. Because of their lighter weight and smaller dimensions, they are also suitable for mobile use to a certain extent.
Mitre saws
Today, the cross-cut and mitre saw is almost always offered as a pull saw, which makes it possible to saw wider workpieces. If the saw unit can be tilted as well as swivelled, so-called compound cuts are possible, which deviate from the right angle in two dimensions.
Our range includes various saws from the manufacturers Festool, Trend and Triton, which meet the highest standards of precision and workmanship. For special purposes, we also offer the Festool Symmetric compound mitre saw and a mitre saw with rechargeable battery from Trend.
When using the mitre saw, you often work with long workpieces. In this case, it is advisable to use additional tables that support the material to the left and right of the saw. These support tables are integrated in the Bora Portacube mitre saw base, but we also offer multifunctional tables for this purpose.
Circular table saws
We offer the Festool circular saw TKS 80 as a smaller but fully-fledged circular table saw for mobile and stationary use. It leaves nothing to be desired in terms of performance and equipment and is distinguished by a feature that is otherwise only found on much larger machines. The SawStop technology ensures a very high level of safety when sawing non-conductive materials, e.g. wood, but also some plastics and the like - serious injuries to fingers or hands are ruled out.
The Triton Workcenter TWX can be equipped with a circular saw module and then used not only as a multifunction table but also as a table saw.
Underfloor pull-out saws
The classic table saw for mobile and semi-stationary use is the underfloor pull saw, as we have known it for decades as the Mafell Erika. In addition to this saw, which enjoys constant popularity, we also offer two models of the Festool trimming saw Precisio, which are characterised by extremely low weight and a very comprehensive package of accessories. The saws from both manufacturers offer the typical advantages of the underfloor pull saw:
- low weight and small dimensions
- high precision in cross-cut and rip cuts
- safe working due to the underfloor pull function
Accessories for saws
Working with the saw becomes easier, more precise and safer with the right accessories. We offer guide rails, pressure combs, push blocks and sliding sticks, saw tables and mitre boxes as well as various small aids for the above-mentioned saw types.
Saw blades for circular saws
A special focus of our accessories programme for circular saws are the circular saw blades. The choice of the right saw blade is not only decisive for the precision and quality of the cut, but also for the safety at work when using the circular saw. We offer a very wide range of different circular saw blades from proven manufacturers including Festool, Mafell, Freud and Trend, which meet the very highest requirements. You can make your choice according to application and material or saw type, or access the range according to the size of the saw blade.