Circular saw blade for table saws
We offer high-quality circular saw blades for these circular table saws from our range, but also for semi-stationary machines from other manufacturers (e.g. the Bosch GTS10XC or the DeWalt 7492) and for the large circular table saws and sliding table saws from renowned manufacturers such as Altendorf, Panhans or Martin.
Read more
Grooving saw blade HM - for all types of wood | for rip and cross cuts - fine cut quality | 150 x 2.5/1.8 x 30mm, Z=18
Item no.: FR-FI14M-AH3Delivery in 1-2 business days
Grooving saw blade HM | for all types of wood | for rip and cross cuts | fine cut quality | 150 x 3,0/2,2 x 30mm, Z=18
Item no.: FR-FI14M-AM3Delivery in 1-2 business days
Grooving saw blade HM | for all types of wood | for rip and cross cuts | fine cut quality | 150 x 4.0/3.0 x 30mm, Z=18
Item no.: FR-FI14M-AR3Delivery in 1-2 business days
Grooving saw blade HM | for all types of wood | for rip and cross cuts | fine cut quality | 150 x 5.0/3.0 x 30mm, Z=18
Item no.: FR-FI14M-AZ3Delivery in 1-2 business days
Grooving saw blade HM | for all types of wood | for rip and cross cuts | fine cut quality | 150 x 2.0/1.4 x 30mm, Z=18
Item no.: FR-FI14M-AE3Delivery in 1-2 business days
Circular saw blade HM - spec. for rip & cross cut - for wood | for rip and cross cuts - medium cut quality | 160 x 2,2/1,6 x 20mm, Z=24 WZ
Item no.: FR-LU2A-0301Delivery in 1-2 business days
Specially for Festool TS60 & CSC SYS50 | Coated plates | Tear-free | Alternate tooth
Item no.: FR-FR08L001HDelivery in 1-2 business days
For TS 60 K, CSC-SYS 50
Item no.: F-205767Delivery in 1-2 business days
Especially for Festool TS60 & CSC SYS50 | wood | cross section | alternate tooth
Item no.: FR-FR08W005HDelivery in 1-2 business days
For TS 60 K, CSC-SYS 50
Item no.: F-205766Delivery in 1-2 business days
Especially for Festool TS60 & CSC SYS50 | wood | rip cut | alternate tooth
Item no.: FR-FR08W003HDelivery in 1-2 business days
Specially for Festool TS60 & CSC SYS50 | non-ferrous metals | plastic | trapezoidal flat tooth
Item no.: FR-FR08A001HDelivery in 1-2 business days
Grooving saw blade HM | for all types of wood | for rip and cross cuts | fine cut quality | 180 x 3,0/2,2 x 30mm, Z=24
Item no.: FR-FI14M-DA3Delivery in 1-2 business days
Grooving saw blade HM | for all types of wood | for rip and cross cuts | fine cut quality | 180 x 4.0/3.0 x 30mm, Z=24
Item no.: FR-FI14M-DC3Delivery in 1-2 business days
190x2,6 FF PW16 Panther saw blade | Diameter: 190 mm | Cutting width: 2,6 mm | Bore Ø: FF mm | Number of teeth: 16 Rake angle: 28 -°
Item no.: F-492049Delivery in 1-2 business days
Wood | rip cuts | alternate tooth
Item no.: FR-FR13W001TDelivery in 1-2 business days
Universal saw blade 190x2,6 FF W32 | Suitable for: CS 50
Item no.: F-492048Delivery in 1-2 business days
Wood | Cross Cutcut | alternate tooth
Item no.: FR-FR13W004TDelivery in 1-2 business days
Wood | Cross Cutcut | alternate tooth
Item no.: FR-FR13W002TDelivery in 1-2 business days
Circular saw blade HM for all types of wood | Longitudinal and cross sections | Universal use | Alternating tooth
Item no.: MAF-092550Delivery in 1-2 business days
Wood | rip cuts | alternate tooth
Item no.: FR-FR13W003TDelivery in 1-2 business days
Fine tooth saw blade 190x2,4 FF W48 | Suitable for: CS 50
Item no.: F-492050Delivery in 1-2 business days
Special saw blade 190x2,6 FF TF58 | Suitable for: CS 50
Item no.: F-492051Delivery in 1-2 business days
Circular saw blade HM - special for rip & cross cut - also in exotic hardwood | for rip and cross cuts - medium cut quality | 200 x 3,2/2,2 x 30mm, Z=48 WZ
Item no.: FR-LU2B-0300Delivery in 1-2 business days
The table saw
The table saw is the workhorse in most woodworking shops. It can be found in commercial businesses (often in the form of the sliding table saw) as well as in the small workshop of the ambitious private user. For the latter target group, the semi-stationary variants (such as the MAFELL Erika or the Festool table saw) are used or the larger stationary machines (like the Laguna Fusion table saw, which we also offer)..
Which saw blade for the circular table saw?
Private woodworkers should have at least three saw blades in their arsenal for their circular saw:
- Saw blade for fine and finest cuts across the grain.
- Saw blade for coarse cutting, especially in the direction of the grain.
- Universal blade, which can also be used to cut wood-based panels.
It should be noted that many larger machines are equipped with a scoring unit, the use of which is recommended for coated panels and for which a second, smaller saw blade is required.
Most commercial users and those private individuals who work more frequently with materials other than solid wood and wood-based panels (e.g. plastics, non-ferrous metals or composites) will take this into account and keep appropriate special or multi-purpose circular saw blades on hand for these materials.