Shaper Origin + Plate + Workstation + Bench Pilot + Shelf Upgrade Kit
Replenishment is on the way
€6,471.22
% €6,768.72 (4.4% saved)
Currently not available
- Shaper Origin:
- 1x Shaper Origin (Gen2)
- 1x Shaper Systainer³ T-Loc
- 2x rolls of ShaperTape (45 m each)
- 1x tool for changing the cutters
- 1x Reusable transport locks
- 1x 8 mm collet chuck
- 1x 3 mm spiral slot cutter
- 1x 6 mm spiral slot cutter
- 1x 60° V-groove cutter
- Shaper Plate:
- 1x MINI-Systainer
- 2x special clamps
- 1x System 32 pin
- 1x support feet
- Shaper Workstation:
- 1x base plate
- 1x front plate
- 1x workpiece carrier
- 1x hold-down device
- Sacrificial moulding (MDF)
- 1x support bar
- 2x support arms
- 1x angle stop
- 1x 4 mm T-spanner
- Shaper Bench Pilot
- Shaper Shelf Upgrade Kit
Shaper Tools GmbH
Dieselstraße 26 70771 Leinfelden-Echterdingen Germany
[email protected]
Shaper Tools GmbH
Dieselstraße 26 70771 Leinfelden-Echterdingen Germany
[email protected]
https://www.shapertools.com/de-de/
Shaper Origin + Plate + Workstation + Bench Pilot + Shelf Upgrade Kit
The Origin Absolute SET
The new Origin complete system makes it even easier to complete a wide range of different tasks with ease - from single pieces of furniture to fitting assembly.
The set consists of:
Technical data
Shaper Origin
- 220-240 V, 50 Hz/60 Hz
- Software updates via WLAN (alternatively via USB)
- Wireless data transfer via ShaperHub
- USB interface enables easy data transfer even without the internet
- Capacitive multi-touch colour LC display
- Developed for the SM1 milling spindle
- Suitable for most standard 27 mm and 36 mm suction hoses (e.g. Festool)
- 720 watts (AC), 10,000 - 26,000 rpm with load-balancing speed control
- Soft start, overtemperature and overload safety cut-out
- Produced by Festool according to Shaper specifications
- Included in the scope of delivery
- Accepts all standard 8 mm shank tools
- Other collets are available separately
- Digitally adjustable milling depth
- Automatic zero point detection
Shaper plate
-
Width
362mm
-
Height
450mm
-
Thickness
6,45mm
-
Weight
2,04kg
-
Width of the milling window
160mm
-
Height of the milling window
120mm
Shaper workstation
-
Max. height
250 mm
-
Depth
465 mm
-
Width
515 mm
-
Total weight
9.75 kg
Shaper Bench Pilot
- 176 x 955 x 568 mm (H x W x D)
-
Total weight
12.85kg
- Compatible with Origin Gen1 and Gen2
Shaper Shelf Upgrade Kit
-
Weight
6.8kg
-
Dimensions (LxWxH)
825 x 390 x 178 mm
Features & benefits
- Shaper Origin:
- Designed for the woodworking trade, with a familiar form factor
- Work on site on workpieces of almost any size
- Designs and mills perfect contours, joints and engravings
- No CAD knowledge required
- On-tool design
- Automatic milling correction
- Intuitive operation
- 8 mm collet chuck allows many milling cutters to be held
- Shaper Plate:
- Robust ShaperTape surface
- Various stops and crosshairs for alignment
- Anti-slip mat on the back
- Can be perfectly combined with the fittings catalogue
- For fitting installations, repair work and filling pieces
- Precise and repeatable routing
- Shaper workstation:
- Equipped with durable ShaperTape surface
- Front panel with T-slots
- Height-adjustable workpiece carrier
- Ideal for tenons & grooves, finger joints and much more
- Base plate: With the ShaperTape surface, it is the core of the workstation and support surface for Origin.
- Front plate: A versatile clamping device with T-slots, which is attached to the base plate at a 90° angle.
- Workpiece carrier: A height-adjustable carrier for securing small or difficult-to-clamp workpieces.
- Hold-down clamps: T-slot clamps for versatile and secure fastening of workpieces.
- Sacrificial strips: Sacrificial material (MDF) used to minimise tear-out during routing.
- Support bar: Extended support surface for Origin and help to correctly align workpieces.
- Support arms: Keep the support bar and therefore Origin level with the ShaperTape surface.
- Angle fence: Easily adjustable fence for easy alignment of a workpiece at the appropriate angle.
- Shaper Bench Pilot:
- Controls Origin automatically
- Transforms Origin into a gantry system
- Easy insertion and removal of Origin, for maximum freedom
- Compatible with Origin Gen1 and Gen2
- Ideal for tenoning, vertical or horizontal routing
- Rotary knob for variable feed speed control
- Design directly on Origin, no programming required
- Origin display shows the remaining milling time
- Emergency stop button in case of emergency
- Shaper Shelf Upgrade Kit
- Over three times the size of the workpiece holder supplied with the workstation
- Enlarged milling area and more stability
- Adjustable support foot with coarse and fine adjustment
- Suitable for the workstation
Compatible accessories
Wireless caliper with Bluetooth® | Measuring range: 200 mm | Accuracy: 0,0254 mm
Item no.: ST-SY1-CC1Delivery in 1-2 business days
Protects the Origins (Gen 2) screen from scratches, dirt and dust.
Item no.: ST-SU1-DSP1Delivery in 1-2 business days
Extend the functionality of Shaper Plate especially for edge processing
Item no.: ST-SU1-PMA2Delivery in 1-2 business days
Increase Speed and Productivity Streamline your Origin Experience
Item no.: ST-SA2-APPEDelivery in 1-2 business days
For easier zeroing | D1: 8 mm | D2: 6 mm | GL: 60 mm
Item no.: SA-TAS-8Delivery in 1-2 business days
You may also like
From sketch to vector graphic in seconds | incl. bag
Item no.: SET-SO2-BUNDLE-13Delivery in 1-2 business days
Great alternatives
Complete Origin System | Shaper Origin | Workstation | Plate | NOT FOR SALE OUTSIDE THE EU
Item no.: SET-SO2-SW1-SV1Delivery in 1-2 business days
Origin System | Shaper Origin | Plate | NOT FOR SALE OUTSIDE THE EU
Item no.: SET-SO2-SV1Delivery in 1-2 business days
Benefit from the SET advantage! | Shaper Origin | Bench Pilot
Item no.: SET-SO2-BUNDLE-5Replenishment is on the way
Benefit from the SET advantage! | Shaper Origin | Plate | Workstation| Bench Pilot
Item no.: SET-SO2-BUNDLE-8Replenishment is on the way
Origin System | Shaper Origin | Workstation | NOT FOR SALE OUTSIDE THE EU
Item no.: SET-SO2-SW1Delivery in 1-2 business days
Benefit from the SET advantage! | Shaper Origin | Workstation| Bench Pilot
Item no.: SET-SO2-BUNDLE-7Replenishment is on the way
Benefit from the SET advantage! | Shaper Origin | Plate | Bench Pilot
Item no.: SET-SO2-BUNDLE-6Replenishment is on the way
World's first hand-guided CNC router | any machining size possible | automatic routing correction | NOT FOR SALE OUTSIDE THE EU
Item no.: ST-SO2-ENDelivery in 1-2 business days