Shaper Origin + Workstation + Bench Pilot

Benefit from the SET advantage! | Shaper Origin | Workstation| Bench Pilot

Replenishment is on the way

€5,936.91

% €6,115.41 (2.92% saved)

Currently not available

Unfortunately, this item has sold out

We will gladly notify you as soon as the item is back in stock.

Email address

I confirm that I have read and accepted the .

Brand: SHAPER TOOLS

Item no.: SET-SO2-BUNDLE-7

Weight: 45.8 kg

Scope of delivery

Shaper Origin:
- 1x Shaper Origin (Gen2)
- 1x Shaper Systainer³ T-Loc
- 2x rolls of ShaperTape (45 m each)
- 1x tool for changing the cutters
- 1x Reusable transport locks
- 1x 8 mm collet chuck
- 1x 3 mm spiral slot cutter
- 1x 6 mm spiral slot cutter
- 1x 60° V-groove cutter
Shaper Workstation:
- 1x base plate
- 1x front plate
- 1x workpiece carrier
- 1x hold-down device
- Sacrificial moulding (MDF)
- 1x support bar
- 2x support arms
- 1x angle stop
- 1x 4 mm T-spanner
Shaper Bench Pilot

Manufacturer

Manufacturer:
Shaper Tools GmbH
Dieselstraße 26 70771 Leinfelden-Echterdingen Germany
[email protected]

EU representative:
Shaper Tools GmbH
Dieselstraße 26 70771 Leinfelden-Echterdingen Germany
[email protected]
https://www.shapertools.com/de-de/

Financing available

Financing options for this item are available through Grenke. More information about terms and the process can be found here.

Shaper Origin + Workstation + Bench Pilot

A versatile combination

Origin and Plate is a combination that makes it possible to mill accurately and precisely. Whether it's fitting or minor repairs: Origin + Plate make it possible! With the Shaper Bench Pilot you can even let the machine work on its own.

The set consists of:

Technical data

Shaper Origin

220-240 V, 50 Hz/60 Hz
Software updates via WLAN (alternatively via USB)
Wireless data transfer via ShaperHub
USB interface enables easy data transfer even without the internet
Capacitive multi-touch colour LC display
Developed for the SM1 milling spindle
Suitable for most standard 27 mm and 36 mm suction hoses (e.g. Festool)
720 watts (AC), 10,000 - 26,000 rpm with load-balancing speed control
Soft start, overtemperature and overload safety cut-out
Produced by Festool according to Shaper specifications
Included in the scope of delivery
Accepts all standard 8 mm shank tools
Other collets are available separately
Digitally adjustable milling depth
Automatic zero point detection

Shaper workstation

Max. height
250 mm
Depth
465 mm
Width
515 mm
Total weight
9.75 kg

Shaper Bench Pilot

176 x 955 x 568 mm (H x W x D)
Total weight
12.85kg
Compatible with Origin Gen1 and Gen2

shaper-origin-workstation-bench-pilot-shaper-set-so2-bundle-7-02

Features & benefits

Shaper Origin:
- Designed for the woodworking trade, with a familiar form factor
- Work on site on workpieces of almost any size
- Designs and mills perfect contours, joints and engravings
- No CAD knowledge required
- On-tool design
- Automatic milling correction
- Intuitive operation
- 8 mm collet chuck allows many milling cutters to be held
Shaper Workstation:
- Equipped with durable ShaperTape surface
- Front panel with T-slots
- Height-adjustable workpiece carrier
- Ideal for tenons & grooves, finger joints and much more
- Base plate: With the ShaperTape surface, it is the core of the workstation and support surface for Origin.
- Front plate: A versatile clamping device with T-slots, which is attached to the base plate at a 90° angle.
- Workpiece carrier: A height-adjustable carrier for securing small or difficult-to-clamp workpieces.
- Hold-down clamps: T-slot clamps for versatile and secure fastening of workpieces.
- Sacrificial strips: Sacrificial material (MDF) used to minimise tear-out during routing.
- Support bar: Extended support surface for Origin and help to correctly align workpieces.
- Support arms: Keep the support bar and therefore Origin level with the ShaperTape surface.
- Angle fence: Easily adjustable fence for easy alignment of a workpiece at the appropriate angle.
Shaper Bench Pilot:
- Controls Origin automatically
- Transforms Origin into a gantry system
- Easy insertion and removal of Origin, for maximum freedom
- Compatible with Origin Gen1 and Gen2
- Ideal for tenon joints, vertical or horizontal routing
- Rotary knob for variable feed speed control
- Design directly on Origin, no programming required
- Origin display shows the remaining milling time
- Emergency stop button in case of emergency

Compatible accessories

workstation-upgrade-kit-werkstuecktraeger-shaper-st-su1-wsuk1-01

Shaper Shelf Upgrade Kit

Accessories for Shaper Workstation | Enlarge the working area | Stable surface Pre-orders are possible. Delivery will take place from August/September 2025.

Item no.: ST-SU1-WSUK1

In stock, delivery in 1-2 business days

€236.81