Spiral Router Bit VHM D5 S6
Available to order expected from 30.12.2026
€57.82
Currently not available
- 1x spiral router bit VHM Ø 5 mm Z2
ENT European Norm Tools GmbH
Willy-Messerschmitt-Straße 10 73457 Essingen Germany
[email protected]
ENT European Norm Tools GmbH
Willy-Messerschmitt-Straße 10 73457 Essingen Germany
[email protected]
https://www.ent.tools/
Spiral Router Bit VHM Z2 Shank 6 mm + Professional Line
VHM spiral router bit with ground flute and 6 mm shank — for hand routers and routing machines with a 6 mm collet. The spiral flute cuts by shearing rather than pushing, which gives clean, tear-free edges even in veneer and coated panels down to the smallest diameter in the range. At D2 and D3, the reduced feed pressure is not a secondary consideration: it is the main reason bits at these sizes survive repeated use. Right-hand helix keeps chips clear of the groove as you cut. For routing depths beyond the cutting length, take two passes.
Technical data
-
D
5 mm
-
NL
17 mm
-
GL
60 mm
-
S
6 mm
-
Z
2
- Left-hand spiral
Features & benefits
- 6 mm shank – for hand routers and routing machines with 6 mm collet
- D5 / NL 17 mm – for joining grooves and rebate work
- Ground flute – shearing cut for tear-free edges even at small diameters
- VHM solid carbide – long tool life in hardwood and laminate panels
- Lower breakage risk from shearing action at small diameters
- Z2 two-flute – generous chip clearance, reliable ejection