Spiral groove cutter
Spiral groove cutters are suitable for processing all types of wood, such as softwood, hardwood, as well as all wood and board materials. Also Plastic can be routed with the router at an appropriately regulated speed. They are also ideal for the use in CNC routing. Furthermore, these routing cutters are also excellent for immersion, i.e. also for recesses and drilling.
Advantages of spiral routing cutters
- the cut is uniform and therefore clean
- reduces vibrations
- pulling speed is increased during routing
Shank 8 mm | D: 18 mm | NL: 25 mm | GL: 57 mm
Item no.: F-490950Delivery in 1-2 business days
Shank 8 mm | D: 8 mm | NL: 19 mm | GL: 50 mm
Item no.: F-490945Delivery in 1-2 business days
Shank 8 mm | D: 20 mm | NL: 25 mm | GL: 57 mm
Item no.: F-490951Delivery in 1-2 business days
Shank 8 mm | D: 14 mm | NL: 20 mm | GL: 52 mm
Item no.: F-490948Delivery in 1-2 business days
Shank 8 mm | D: 4 mm | NL: 10 mm | GL: 45 mm
Item no.: F-490977Delivery in 1-2 business days
Shank 8 mm | D: 8 mm | NL: 25 mm | GL: 55 mm
Item no.: F-490979Delivery in 1-2 business days
Shank 8 mm | D: 16 mm | NL: 20 mm | GL: 52 mm
Item no.: F-490949Delivery in 1-2 business days
Shank 8 mm | D: 12 mm | NL: 20 mm | GL: 52 mm
Item no.: F-490947Delivery in 1-2 business days
D: 3 mm | NL: 12 mm | GL: 60 mm | S: 8 mm | Z: 2 | Left-hand spiral
Item no.: E-10020Delivery in 1-2 business days
D: 3 mm l NL: 12 mm l SL: 46 mm l GL: 60 mm l Right-hand twist
Item no.: KLE-T162-030-RDelivery in 1-2 business days
D: 3 mm l NL: 12 mm l SL: 46 mm l GL: 60 mm l Left-hand twist
Item no.: KLE-T163-030-RDelivery in 1-2 business days
D: 4 mm l NL: 14 mm l SL: 42 mm l GL: 60 mm l Right-hand twist
Item no.: KLE-T162-040-RDelivery in 1-2 business days
D: 4 mm l NL: 14 mm l SL: 43 mm l GL: 60 mm l Left-hand twist
Item no.: KLE-T163-040-RDelivery in 1-2 business days
D: 4 mm | NL: 15 mm | GL: 60 mm | S: 8 mm | Z: 2 | Left-hand spiral
Item no.: E-10022Delivery in 1-2 business days
D: 5 mm | NL: 17 mm | GL: 60 mm | S: 8 mm | Z: 2 | Left-hand spiral
Item no.: E-10024Delivery in 1-2 business days
D: 5 mm l NL: 17 mm l SL: 40 mm l GL: 60 mm l Right-hand twist
Item no.: KLE-T162-050-RDelivery in 1-2 business days
D: 5 mm l NL: 17 mm l SL: 40 mm l GL: 60 mm l Left-hand twist
Item no.: KLE-T163-050-RDelivery in 1-2 business days
D: 6 mm l NL: 22 mm l SL: 46 mm l GL: 70 mm l Left-hand twist
Item no.: KLE-T163-060-RDelivery in 1-2 business days
D: 6 mm | NL: 27 mm | GL: 70 mm | S: 8 mm | Z: 2 | Left-hand spiral
Item no.: E-10026Delivery in 1-2 business days
D: 6 mm l NL: 22 mm l SL: 46 mm l GL: 70 mm l Right-hand twist
Item no.: KLE-T162-060-RDelivery in 1-2 business days
D: 7 mm l NL: 32 mm l SL: 46 mm l GL: 80 mm l Right-hand twist
Item no.: KLE-T162-070-RDelivery in 1-2 business days
D: 7 mm l NL: 32 mm l SL: 46 mm l GL: 80 mm l Left-hand twist
Item no.: KLE-T163-070-RDelivery in 1-2 business days
D: 8 mm l NL: 22 mm l SL: 56 mm l GL: 80 mm l Right-hand twist
Item no.: KLE-T142-080-RDelivery in 1-2 business days
D:- 8 mm l NL:- 22 mm |; GL: 80 mm | Left twist
Item no.: KLE-T152-080-RKDDelivery in 1-2 business days
Difference between right- and left-hand twist
Depending on the application and machine, please note whether you require a spiral grooving cutter with right-hand twist/right-hand rotation or left-hand twist/left-hand rotation.
A right-hand twist, also called an "up-cut", is recommended for fast work. Here the chips are ejected immediately and clogging is avoided. The result is also a very clean groove bottom.
Spiral groove cutters with left-hand twist, "Down-Cut", on the other hand, work with a pulling cut and produce an enormously clean cutting edge and are therefore ideally suited for use where the Edges remain visible afterwards. Disadvantages are the chip removal downwards, a not so clean groove bottom and the slower feed speed.