Multifunctional tables
The reasons for the popularity of multifunctional tables are obvious: they are flexible and mobile work tables. MFTs are lighter in construction than traditional planing and workbenches - the base is usually made of aluminium rails - and often equipped with wheels or castors so that they can be moved around the workshop or construction site as needed. Some models can even be folded up for transport. Such foldable multifunctional tables are popular with do-it-yourselfers who only need a work table occasionally and otherwise want to store it in a space-saving way.
Read more
Mobile, universal clamp XXL | SJA100XL | up to 1000 mm clamping width and 1000 kg clamping pressure
Item no.: TS-799226Delivery in 1-2 business days
For easy marking and routing of your MFT | Especially recommended for copy rings with a large sleeve height
Item no.: SA-VB-PRO-TRANS-KITDelivery in 1-2 business days
for attachment to the Vario-Bench base frame | Set includes rubber buffer, sliding blocks M6 and screws M6
Item no.: SA-VB-FIX-KITDelivery in 1-2 business days
Height-adjustable | high load capacity | mobile | storage space | extendable Table size: 1600 x 800 / 2200 x 800 mm extended | Hole-Ø: 20 mm At present shipping is only possible to the EU, Switzerland and Norway
Item no.: SET-RU-21015Delivery in 1-2 business days
height adjustable | high load capacity | mobile | storage space | swivels At present shipping is only possible to the EU, Switzerland and Norway
Item no.: SET-RU-21069Delivery in 1-2 business days
Horizontal clamp with clamping bolt Clamping bolts for Ø 20 mm hole systems
Item no.: RU-21123Delivery in 1-2 business days
Mobile and flexible table extension and work aid | Height adjustable from 635 to 1111 mm | Ø 29 mm glide roller
Item no.: BOR-PM-5090Delivery in 1-2 business days
1200 mm | Suitable for Ø 20 mm hole systems | Slip-resistant | No tools required
Item no.: RU-21330Delivery in 1-2 business days
800 mm | 4 clamping bolts Ø 20mm clamping lever | screwed-on sliding surface
Item no.: SET-RU-21333Delivery in 1-2 business days
800 mm | 2 clamping bolts Ø 20mm clamping lever | screwed-on slide covering
Item no.: RU-21333Delivery in 1-2 business days
1200 mm | 4 clamping bolts Ø 20mm clamping levers | screwed-on sliding surface
Item no.: SET-RU-21330Delivery in 1-2 business days
2 Piece Clamp Set | For use on multifunction tables such as Festool MFT
Item no.: BE-WNS-SET-MFTDelivery in 1-2 business days
Screw clamp for guide rails | Suitable for sauter profile rails and | Guide rails of the brands Festool, Makita and many more
Item no.: BE-GTR30B6Delivery in 1-2 business days
Lever clamp for guide rails | Suitable for sauter profile rails and | Guide rails of the brands Festool, Makita and many more
Item no.: BE-GTR16S6HDelivery in 1-2 business days
Screw clamp for guide rails | Suitable for sauter profile rails and | Guide rails of the brands Festool, Makita and many more
Item no.: BE-GTR16B6Delivery in 1-2 business days
Toggle lever clamp with clamping bolt | Clamping bolt for Ø 20 mm hole systems
Item no.: RU-21124Delivery in 1-2 business days
3 different support options for every purpose | Portable | Stable | Flexible
Item no.: BOR-PM-5093Delivery in 1-2 business days
Short workpiece fence to complement the long precision fence for the Vario-Bench as well as universal for multifunction tables with Ø 20 mm grid
Item no.: SA-VB-FENCE-SDelivery in 1-2 business days
Screw clamp for guide rails | Suitable for sauter profile rails and | Guide rails of the brands Festool, Makita and many more
Item no.: BE-GTR12Delivery in 1-2 business days
Simple and universal | 1 pair | for multifunctional tables with hole grid Ø 20 mm | For MFT 3 and Mobile Workshop MW 1000 and for SYS-MFT
Item no.: F-488030Delivery in 1-2 business days
Stably supported and perfectly aligned workpieces on the MFT | for the Vario-Bench as well as universally for multifunction tables with Ø 20 mm grid .
Item no.: SA-VB-FENCEDelivery in 1-2 business days
Smoothly and ergonomically glide over the Vario-Bench precision fence | Stop for perfect alignment of the workpiece on the multifunction table .
Item no.: SA-VB-RIDERDelivery in 1-2 business days
For using on multifunction tables such as Festool MFT | Hole diameter of 20 mm and plate thickness of min. 19 mm
Item no.: BE-BH-MFTDelivery in 1-2 business days
Magnetic bench dogs with low profile | perfect for surface finishing | 3 pieces | Ø 20 mm
Item no.: SA-VB-BDOG-LOWDelivery in 1-2 business days
The name says it all.
In many woodworking shops today (both commercial and private), it is becoming increasingly common to find one (or more) multifunctional tables alongside the traditional workbench. Users who work almost exclusively with power tools and stationary machines sometimes even dispense with the workbench altogether and work only on multifunctional tables and other work tables.
Construction of a Multifunctions table.
These work tables are multifunctional mainly because of two special features of their construction. The worktop (usually made of MDF or a coated wood-based panel) has a perforated grid. A variety of clamping tools, stops, guide rails and other auxiliary devices can be inserted into these holes to securely fix the workpiece during machining or to guide tools along it. Since the perforated grid usually extends over the entire table surface, larger and irregularly shaped workpieces can also be clamped.
The holes of this grid usually have a diameter of 20 mm, which is now becoming the standard compared to a diameter of 19 mm. We offer an almost large spectrum of accessories for 20 mm holes, ranging from simple bench dogs to complete clamping systems, toggle clamps and hold-downs to support rails for the multifunction table. This variety of accessories ensures that the multifunctional table really lives up to its name.
The frame of many multifunctional tables consists (either at the edges of the work surface or in its entirety) of aluminium profile rails with T-slots. This results in a variety of further mounting options for the above-mentioned auxiliary devices. In this way, the multifunctional table opens up a third dimension for clamping.
Multifunctions Table Vario Bench
A special feature in this context is our multifunctional table Vario-Bench, which shows its strengths above all when cutting material with the hand-held circular saw, but also when working with the manually guided router. The holes in the perforated worktop are not arranged in a right-angled grid as in other models, but in a special pattern, thus enabling precise sawing or routing at any desired angle to the workpiece edge.
Build your own Mulitfunctions Table
In addition to a range of prefabricated multifunction tables from various manufacturers (including the Festool MFT and the sauter Vario-Bench), we also stock all the components you need to build a table yourself exactly to your own specifications and dimensions. With our multifunctional table configurator, the possibilities of a work table tailored to your needs are even extended.
In addition to the configurator, we also offer you the option of designing your own individual MFT using the Vario-Master steel template developed by us. The steel template serves as a basis for an MDF worktop, for example. After wear and tear, you can create a new worktop at any time. The steel template offers the same advantages as the Vario-Bench (see above), namely accurate-angle and precise sawing.