senkbohrer-tiefenanschlag-wpw-wp-aqp3604sc-01

senkbohrer-tiefenanschlag-wpw-wp-aqp3604sc-02

Countersinks with 3.6 mm drill bit and depth stop

with hex shaft 1/4" (6.3 mm) | D1: 3,6 mm | D: 12,7 mm | L: 60 mm

Not available at the moment

28,81 €

incl. VAT / excl. shipping costs

Brand:WPW
Article no.:WP-AQP3604SC
Weight:0.078kg

Countersinks with 3.6 mm drill bit and depth stop

for clean surfaces and easy depth control.

If two pieces of wood are to be connected by screws, pre-drilling and countersinking are essential to achieve an aesthetic and long-lasting result. The countersink with depth stop combines the two in one.

Technical Data

Drill Ø: 3.6 mm
Countersink Ø: 12.7 mm
Length: 60 mm
Bit shank: 1/4" (6.3 mm)

Properties & Advantages

Adjustable depth stop (mounted in bearings) for quick and even depth adjustment of the countersink
Increased service life and clean result: Countersink is equipped with carbide cutting edges (HM-tipped)
Depth stop helps to achieve an equal countersinking depth to match the screw
Suitable both for hands-free operation and stationary use
1/4" (hex shaft) for extremely secure hold in the drill chuck
No disassembly of the depth stop necessary!
No scratches & burn marks

Countersinks with 3.6 mm drill bit and depth stop

with hex shaft 1/4" (6.3 mm) | D1: 3,6 mm | D: 12,7 mm | L: 60 mm

Countersinks with 3.6 mm drill bit and depth stop

for clean surfaces and easy depth control.

Technical Data

Properties & Advantages

You may also like

Countersinks with 3.6 mm drill bit and depth stop

for clean surfaces and easy depth control.

Technical Data

Properties & Advantages

You may also like