REBATE CUTTERS FOR THE MACHINING OF EDGES
Rebate cutters are used for edge processing and should not be missing in any cutter collection. With this milling insert, rebates, i.e. right-angled shoulders on the edge of the workpiece, can be milled. Areas of application are e.g. frames, doors, panels or drawers made of soft and hard wood.
Rebate cutters with ball bearing
As the rebate cutters are equipped with a ball bearing, you do not need an additional guide to guide the cutter cleanly and precisely along the edge. No matter whether the edge to be machined is straight or curved, the thrust ring keeps the router in the correct position. Picture frames or even curved frame shapes, e.g. frames for a mirror, can be best provided with the appropriate rebate using a rebate router with ball bearing.
With an exchangeable ball bearing, up to 6 different rebate depths can be achieved with just one cutter. Even if a ball bearing is defective, there is no need to buy a new cutter. It is sufficient to mount a new ball bearing and the cutter is fully functional again.
Professional rebate cutters
The range consists of HM (HW) tipped cutters with different diameters and in high quality, whose shank is stably and firmly connected to the cutter head. The cutters are strong enough to be resharpened several times. Both are criteria that also contribute to safety in the workplace and, of course, also provide perfect milling results when used properly. We offer the milling inserts in the common shank sizes 8 mm and 12 mm. Click here for the rebate cutters with 12 mm shank.