Fold routing cutter for machining edges
Folding cutters are used for edge processing and should not be missing in any cutter collection. This routing insert can be used to mill rebates, i.e. right-angled shouldering at the edge of the workpiece. Areas of application are e.g. frames, doors, panels or drawers made of soft and hard wood.
Rebate cutter with ball bearing
Since the rebate cutters are equipped with a ball bearing, you do not need an additional guide to guide the cutter cleanly and precisely along the edge. It doesn't matter if they're the starting ring holds the position of the router correctly. Picture frames or also curved frame forms, e.g. frames for a mirror, can be produced with a rebate cutter with ball bearings can be optimally equipped with the corresponding rebate.
With a replaceable ball bearing, up to 6 different rebate depths can be achieved with just one cutter. Even if a ball bearing is defective, it is not necessary to buy a new routing cutter. E flat the routing cutter is now fully functional again.
Professional routing cutters
The assortment consists of HM (HW) tipped routing cutters with different diameters and high quality, whose shank is stable and firmly connected to the routing head. The knives are strong enough to be resharpened several times. Both are criteria which also contribute to safety at the workplace and, of course, also to perfect routing results when properly performed Application. We offer the routing inserts in the standard shank sizes 8 mm and 12 mm. Here you get to the rebate cutters with 12 mm shank.